Welcome Guest to Coatings World    Login || Register
Last Updated Thursday, October 30 2014
Print

Automotive coatings, adhesives and sealants industry report



Published July 16, 2008
Related Searches: Sealants Color Automotive Coatings Adhesives
Automotive coatings, adhesives and sealants industry report
U.S. demand for automotive coatings, adhesives and sealants is expected to increase 2.6% annually to $5.3 billion in 2012, with volume reaching 1.6 billion pounds, according to “Automotive Coatings, Adhesives & Sealants,” a new study from The Freedonia Group, Inc., a Cleveland-based industry research firm. Coatings will continue to dominate the market, accounting for nearly 80% of market value. Slow gains in this segment will offset the more rapid advances seen in the smaller volume adhesive and sealant markets. An improving outlook for motor vehicle production will support volume gains, as will the increasing importance of structural adhesives in vehicle assembly.
The OEM market for coatings, adhesives and sealants is heavily dependent on motor vehicle production patterns. Through 2012, motor vehicle production is expected to rebound from the poor performance experienced during the 2002-2007 period, spurring demand in the OEM market.
Aftermarket demand will benefit from continued growth in the motor vehicle park, as well as the popularity of light trucks, vans and sport utility vehicles over the past decade. Despite below average gains in the production of these larger light vehicles due to high fuel prices and market saturation, these vehicles—which consume higher volumes of coatings, adhesives and sealants in their repair than do smaller light vehicles—will maintain a significant share of the motor vehicle park. Providing further aftermarket support will be above average increases in the number of medium and heavy vehicles in use.
Demand for coatings will be limited to some extent, as competing alternatives such as paint film and in-molded color, which are used with plastic substrates, can offer cost advantages, reduced production time and improved wear-resistance. Adhesives, on the other hand, will benefit from the shift toward plastics, as they are lower in cost and better-suited for use with plastics than mechanical fasteners.



blog comments powered by Disqus
Receive free Coatings World emails
Sign up now to receive the weekly newsletter, and more!

Enter your email address:
Company Spotlight
Micro Powders, Inc.
580 White Plains Rd.
Tarrytown, NY, 10591
US
View Profile
Shamrock Technologies, Inc.
Foot of Pacific Street
Newark, NJ, 07114
USA
View Profile
BASF Corporation
100 Campus Drive
Florham Park, NJ, 07932
US
View Profile
AZ Electronic Materials Co., Ltd.
No. 458-6, Sinsing Road Hu Kou Township Hsinchu Country 303, Taiwan
Hsinchu Country, Taiwan, 303
Taiwan
View Profile
Sunin Machine Co., Ltd.
No.96, Chiao Ho Rd ,Chungho Dist
New Taipei City, Taiwan , 235
Taiwan Roc
View Profile
Houchi Chemical Co., Ltd
No.56, Fu Chow Street
Taipei, Taipei, 100
Taiwan
View Profile
Keeneyes
18F, No.85, Sec. 1, Chung-Shiao E. Rd.
Taipei, Taiwan, 100
R.O.C.
View Profile
Lubrizol Advanced Materials, Inc.
9911 Brecksville Road
Cleveland, OH, 44141
US
View Profile
Siltech Corporation
225 Wicksteed Avenue
Toronto, ON, M4H 1G5
Canada
View Profile
Follow Coatings World On