Raw Materials & Equipment

Hamamatsu Introduces New Light Source for UV Curing

10.05.10

Hamamatsu’s new Lightningcure LC-L3 series is a UV light source for fast UV curing of UV adhesives, UV/radcure coatings, and UV inks. This light source features 9 long-lasting light emitting diodes (LED) that generate stable, high-intensity UV light to ensure rapid curing with minimal thermal effects. Depending on the model, the LC-L3 emits UV light at 365 nm with 250 mW/cm2 intensity or at 385 nm with 325 mW/cm2 intensity. Special features of the LC-L3 include individually programmable LEDs. On/off switching and light level adjustments can be controlled on each LED, allowing the creation of tailored profiles for added flexibility. For more flexibility, multiple LC-L3 units can be combined to irradiate large areas or a linear area.

Related Raw Materials & Equipment

Production Equipment | Suppliers Corner

Ross Tumble Blenders now available

Charles Ross & Son Co. has introduced fully-equipped Ross V-Cone and Double Cone Tumble Blenders that are now available from stock or with fast delivery times. Used for routine blending of free-flowing solids, as well as batching precise blends c…
09.10.12
Production Equipment | Suppliers Corner

New features offered on Ross Ribbon Blenders

Ross introduces several new features on its Ribbon Blender models including low-maintenance gasket-free covers, custom bag dump station with safety grating, clamshell coupling for quick agitator removal, vacuum and pressure-rated blenders with reinfo…
06.01.12
Production Equipment | Suppliers Corner

Phoseon Technology delivers smaller, lighter LED curing lamps

Phoseon Technology introduces a new design for the FireFly FF200 25x20mm and 50x20mm UV LED curing products. This new 4W/cm² air-cooled product provides an ideal solution for customers by providing a small body frame for full cure applications a…
03.22.12
Production Equipment | Suppliers Corner

Newly improved gearbox design of Ross Planetary Mixers

Ross Planetary Mixers are now offered with newly improved sealed and purged gearbox assemblies for sensitive applications requiring the tightest protection against contamination. Pictured are Ross 40-gallon Double Planetary Mixers designed for high-…
03.12.12
Production Equipment | Suppliers Corner

Phoseon Technology launches FirePower family of products

Phoseon Technology has introduced the FirePower family of UV LED curing products. The FirePower products are high performance water-cooled LED curing lamps offering either 12W/cm2 or 16W/cm2 peak irradiance. The company said these products offer adva…
03.07.12
Additives | Production Equipment | Suppliers Corner

Ross expands static mixers inventory

Charles Ross & Son Company has expanded its inventory of Low Pressure Drop (LPD/LLPD) and Interfacial Surface Generators (ISG) Static Mixers to meet customer demand. Many popular sizes are now available from stock to just two weeks from receipt o…
02.27.12
Production Equipment | Suppliers Corner

New Ross laboratory Ribbon/Paddle Blender

Ross has introduced a new Ribbon Blender Model, the 42NSD-1S, a multi-purpose unit equipped with interchangeable double ribbon and paddle agitators. With a maximum working capacity of one cubic foot, the 42NSD-1S is ideal for most laboratory and pilo…
02.13.12
Production Equipment | Suppliers Corner

Sulzer Mixpac offers dispensing system innovations for 2K materials

Sulzer Mixpac offers two-component dispensing system technologies. The two latest innovations include a two-component biopolymer cartridge and new dispensing systems for two-component protective coatings in the area of corrosion protection. Research…
01.24.12
Laboratory Equipment | Production Equipment | Suppliers Corner

Hamamatsu introduces deuterium light source units with ultrahigh brightness

Hamamatsu's L11798 and L11799 deuterium light source units offer ultrahigh brightness and ease of use for a wide variety of UV applications such as semiconductor inspection, film thickness measurement, UV-visible spectroscopy, and environmental a…
11.10.11
Production Equipment | Suppliers Corner

Spectronics Corp. launches the Maxima ML-3500C UV lamp

Spectronics Corporation has introduced the Maxima ML-3500C UV lamp designed to cut the time it takes to cure adhesives, coatings, inks, epoxies, resins, printed circuit boards, plastics and other materials. The lamp produces a nominal steady-state UV…
10.12.11
Production Equipment | Suppliers Corner

Phoseon Technology introduces UV LED lamps with 16W/cm2 peak irradiance

Phoseon Technology has introduced the FirePower product family with three curing length options, a 150x20 mm, a 225x20mm, and a 300x20mm solution. The water-cooled FirePower family allows new applications in the wide-format digital segment while also…
10.12.11
Pigments | Production Equipment | Suppliers Corner

3M offers low cost micro milling media

New experimental product from 3M offers performance equivalent to yttria-stabilized zirconia beads at a price point.
09.09.11
Production Equipment | Suppliers Corner

Hamamatsu introduces the new LC-L5 UV-LED light source for UV curing

Hamamatsu Corporation has introduced the LC-L5 (L11403 series), the latest addition to its Lightningcure series of UV spot light sources. Its characteristics make the LC-L5 an excellent solution for curing materials such as UV curing adhesives and co…
03.15.11
Production Equipment | Suppliers Corner

Union Process builds its first C-20 Continuous Attritor

The C series Continuous Attritor uses one-eighth to three-eighth inch grinding media. The C-20 Attritor is designed for applications that require continuous production of large quantities of material. It is a low maintenance, high efficiency mill des…
03.15.11
Production Equipment | Suppliers Corner

Union Process’ New Lab Model Attritor for Small Media

Union Process has built an 05-SDM hybrid mill capable of small media milling. The model 05-SDM combines the features of a standard wet grinding, laboratory Attritor batch mill with the added benefits of being able to handle small media milling.…
11.11.10