Product Spec Sheets

Polyfluo® 400XF

Released by Micro Powders, Inc.

July 30, 2013

POLYFLUO 400XF is a special grade of micronized modified fluorocarbon which has been developed to provide maximum slip and lubricity when added to printing inks, paints and surface coatings. POLYFLUO 400XF has been micronized to a 1.0-1.5 NPIRI grind gauge reading for easier dispersion and better gloss properties. Incorporation into most coatings can be easily achieved with high speed mixing equipment. There is no need for prior compounding or grinding due to the fine particle size of the POLYFLUO 400XF. At low levels, POLYFLUO 400XF will impart a high degree of lubricity along with excellent rub resistance when added to inks, paints and coatings.

Recommended areas of usage are: heat-set offset, quick set, ultra-violet and metal decorating inks, overprint varnishes, as well as, industrial paints such as coil and can coatings.

Optimum properties are usually achieved by adding 1-2% by weight when the POLYFLUO 400XF is used as the sole slip additive. In some cases, more desirable slip properties are achieved by adding the POLYFLUO 400XF in combination with micronized waxes or polyethylenes. When used in combination with the above types, a 2:1 ratio (wax or polyethylene: POLYFLUO 400XF) is recommended. A concentration of 1/2-1% by weight of the POLYFLUO 400XF is recommended when it is used in combination.

Related Knowledge Center:

blog comments powered by Disqus