Product Spec Sheets

Polyfluo® 535XF

Released by Micro Powders, Inc.

July 30, 2013

POLYFLUO 535XF is a special grade of micronized modified fluorocarbon which has been developed to provide maximum slip, scratch and abrasion resistance when added to printing inks, paints and surface coatings. POLYFLUO 535XF has been micronized to a 1.0-1.5 NPIRI grind gauge reading for easier dispersion and better gloss properties. Incorporation into most coatings can be easily achieved with high speed mixing equipment. There is no need for prior compounding or grinding due to the fine particle size of the POLYFLUO 535XF. At low levels, POLYFLUO 535XF will impart a high degree of lubricity along with excellent rub resistance when added to inks, paints and coatings.

Recommended areas of usage are: heat-set offset, quick set, ultra-violet and metal decorating inks, overprint varnishes, as well as, industrial paints such as coil and can coatings.

Optimum properties are usually achieved by adding 1-2% by weight when the POLYFLUO 535XF is used as the sole slip additive. In some cases, more desirable slip properties are achieved by adding the POLYFLUO 535XF in combination with micronized waxes or polyethylene’s. When used in combination with the above types, a 2:1 ratio (wax or polyethylene: POLYFLUO 535XF) is recommended. A concentration of 0.5 – 1.0% by weight of the POLYFLUO 535XF is recommended when it is used in combination.

At temperatures above 600°F some polymer fumes may be emitted due to decomposition of the fluorocarbon polymer. Therefore smoking should not be permitted when working with this material.