(800) 528-7411; (602) 470-1414
Product Name:Computrac Max 2000XL
Attributes/comments:The Computrac Max 2000XL, recently approved for use under ASTM D7232-06, is used in R&D, quality control and industrial process control applications. It utilizes rapid loss-on-drying technology for a fast and easy testing alternative to measure non-volatile content of paints and coatings.
Product Name:Computrac Max 5000
Attributes/comments:The Computrac† Max 5000 moisture/solids/ash analyzer provides accurate results in a fraction of the time required by traditional test methods. It has features specifically designed for the paint and coatings industry including a syringe test to eliminate solvent evaporation; a foil test to analyze paint solids; and nitrogen purge to eliminate flashing caused by volatiles.
Product name:DV-I Prime Lab Viscometer
Attributes/comments:Attractive new design with easy-touch keypad high lights Brookfield's lowest-cost continuous-sensing benchtop viscometer.† Ideal for quick single point viscosity tests.† The DV-I Prime displays viscosity in cP or mPa.s and transmits to a printer or PC with the push of a button.
Product name:AST-100 In-Line Process Viscometer
Attributes/comments:Compact unit with flow-through continuous measurement or viscosity. In combination with Brookfield's single-station controller, your process will maintain in-spec conditions for all paint/coating formulations. Clean-in-place design permits direct flushing between batches.
Elizabeth City, NC
Product name:HPAS-2000 Particle Analysis System
Attributes/comments:The Hockmeyer HPAS-2000 is a complete system for the laboratory or plant that performs accurate size distribution analysis of particle suspended in liquids or dry powders. The micro-part software automatically analyzes sampling data and produces accurate, objective and relevant information including mean particle size, frequency and distribution by number, area and volume.
Product name:Hoover Automatic Muller
Attributes/comments:Pigment mulling with the Hoover Automatic Muller is easy, accurate and uniform everytime. The Hoover Automatic Muller has become the standard piece of testing equipment for the pigment industry throughout the world. It is recognized in both ASTM and ISO standards as an approved way to prepare samples for color evaluation. The Hoover Automatic Muller is used universally throughout the pigment, ink, coatings, cosmetic, plastic and electronic chemicals industries.
Product name:ADM-2 Automatic Draw Down Machine
Attributes/comments:The ADM-2 removes operator variables from using grind gages. Scrapper angle, force and speed are tightly controlled compared to manual operation. The ADM-2 is multi-speed with scrapper speeds of one to ten seconds to meet the needs of any lab.
Product name:QUV Accelerated Weathering Tester
Attributes/comments:The QUV Accelerated Weathering Tester is the world's most widely used weathering tester, and provides the best simulation of short-wave sunlight and moisture for accelerated physical property testing. The QUV is cost effective, easy to use and maintain, and available in three models to simulate a variety of environments.
Q-Panel Standardized Test Substrates
Attributes/comments:Q-Panel brand substrates are the world standard for a consistent and uniform test service. Q-Panel substrates minimize metal variability as a source of bias in critical tests. Thousands of laboratories use steel, aluminum and iron phosphated panels for color development, weathering exposures, physical properties testing and corrosion testing.
Should Your Company Be Here?
Please send information to: Coatings World Testing Equipment Directory
70 Hilltop Rd., Ramsey, NJ, 07446
Fax: (201) 825-0553