Green Coatings Technology

By Tim Wright | May 12, 2008

Paint manufacturers continue to innovate �greener� paint technology to meet consumer demand and regulations.

In the years following the release of Al Gore's An Inconvenient Truth, environmental issues have moved to the forefront of the U.S's agenda and the public's consciousness. Consumer demand for healthier options today is being driven by the media's focus on issues of health and sustainability. The idea of "going green" has gained widespread support across a broad spectrum of consumers and businesses.

From fuel efficient hybrids to celebrity advocacy to daily headlines concerning global warming, the green movement continues to gain momentum. In 2006, for example, an estimated $10 billion worth of green buildings were under construction in the U.S.

Green chemistry, also known as sustainable chemistry, is an umbrella concept that has grown substantially since it fully emerged more than a decade ago. By definition, green chemistry is the design, development and implementation of chemical products and processes to reduce or eliminate the use and generation of substances hazardous to human health and the environment.

Green is also a marketing tactic. Having a low level of VOCs has emerged as a key selling point. All major paint makers today have "green" product offerings. Some feature green certification on the label, such as Green Seal.

But what makes green paints green and are they really green?

Many environmental organizations such as the U.S. EPA, South Coast Air Quality Management District (SCAQMD), Leadership in Energy and Environmental Design (LEEDS) and Green Seal have established a number of standards regarding VOCs. But there is no universally accepted definition of green as it concerns VOCs and odor.

Generally speaking, VOC levels for interior latex paints are 150 grams per liter for non-flat paints and 50 grams per liter for flat paints. Exterior paints are typically 200 grams per liter for non-flat and 100 grams per liter for flat paints.

However, often these levels do not account for the colorant system that is added to the base paint. Universal colorants can have more than 240 grams per liter of VOCs. From this perspective, green paints may not be as green as they are touted.

While many kinks still need to be worked out in the green arena, paint makers are moving in the right direction. Moving forward they will continue to tweak formulas to meet consumer demand for healthier products as well as an increasingly stringent regulatory environment. Building on the Ozone Transport Commission's low VOC paint regulations in 2005, further regulations went into effect in certain areas of northern Virginia in January 2008. In May of this year, Connecticut will en act its own Architectural Industrial Maintenance (AIM) regulations, restricting non-low VOC paints. Massachusetss will en act its AIM regulations in January 2009. Further legislation is expected at the federal level with a proposed implementation date of January 1, 2009.

Greener products

Solving the issue of colorants has been a top priority for paint makers. The following products are well on that path with innovative colorant systems.

In November of last year Southern Diversified Products introduced Mythic Paint. The result of over six years of research with polymer research partners at the University of Southern Mississippi (USM), the new paint is based on patented technology designed to improve latex paint at its core and has been formulated to offer all of the premium qualities of conventional water-based paints without the need for toxic solvents, according to the company. This means zero VOCs, zero harmful toxins released into the air and no unpleasant odor when painting. This line includes a primer and flat ceiling paint in addition to flat, eggshell, semi-gloss and exterior satin varieties and uses a proprietary toxin-free coloring system and MatchRite Color Matching Software.

C2's LoVo low VOC paint
New York-based C2, a paint company founded in 1998 by Tom Hill, former chief chemist for Pratt & Lambert, recently launched LoVo, a low VOC paint line of 496 colors. In addition, C2 employs 16 colorants to create its colors. The official launch was held last month during the week leading up to Earth Day.

ArmourColor is a new division of UK-based Armourcoat. The company launched its ArmourColor range of decorative finishes with low VOCs to the U.S. market earlier this year at PACE 2008. The range of architectural coatings comprises three surface finishes including Perlata, Escenta and Tactite.

Freshaire Choice Paint uses the ColorFresh delivery system to ensure uniform color and mixes a new zero VOC paint with a new zero VOC tinting system.

To help consumers identify its green coatings, Sherwin-Williams has introduced the GreenSure designation for its environmentally friendly products. Duration Home and Harmony carry the GreenSure logo and both have earned the Good Housekeeping Seal of Approval.

Elan is a new low odor and low VOC formulation from Valspar. The 100% acrylic latex enamel utilizes the latest ceramic technology and is meant for interior wall, trim and ceiling surfaces.

ICI's Freshaire Choice Paint
ICI Paints and The Home Depot teamed up and launched Freshaire Choice Paint in April. The paint is free of VOCs and available in 66 colors. The Freshaire Choice Paint is the first residential, tinted paint product to be GreenGuard Indoor Air Quality Certified and the only paint to be awarded certification for children and schools, according to the company, by the GreenGuard Environmental Institute (GEI).

Three years in development, Benjamin Moore unveiled Aura on the West Coast last year and completed the product's nationwide rollout earlier this year. A 100% acrylic interior, Aura features Benjamin Moore's patent-pending ColorLock technology partnered with a waterborne colorant system. ColorLock technology locks in the color, enabling Aura to cover most surfaces in a single coat, according to the company. Aura is also now available in an exterior edition.

By creating a waterborne colorant system, Benjamin Moore says that no additional VOCs are introduced into the product when colorant is added. Aura is GreenGuard certified and was included in the "Best of What's New" for 2007 from Popular Science.

History of green chemistry

1991: The phrase "Green Chemistry" is coined by the chemist Paul Anastas.
1992: UN Conference on Environment and Development (UNCED) in Rio de Janeiro. Agenda 21 was adopted.�� �
1995: On President Bill Clinton�s initiative, EPA started to give an annual "U.S. Presidential Green Chemistry Challenge Award." Today there are similar awards in Great Britain, Australia, Italy, Germany and Japan.�� �
1997: The Green Chemistry Institute is formed by Joe Breen in the U.S. In 2001 a similar cooperation is started with the American Chemical Society.�� �
1998: Paul Anastas publishes the book "Green Chemistry: Theory and Practice" together with J. C. Warner. The book includes "The Twelve Principles of Green Chemistry."�� �
1999: The Royal Society of Chemistry in London formed "The Green Chemistry Network" and started to publish the paper "Green Chemistry."�� �
2002: "Handbook of Green Chemistry and Technology" is published.�� �
2003: MISTRA�s Greenchem program is started.

The 12 principles of green chemistry

1. It is better to prevent waste than to treat or clean up waste after it is formed.
2. Synthetic methods should be designed to maximize the incorporation of all materials used in the process into the final product.
3. Wherever practicable, synthetic methodologies should be designed to use and generate substances that possess little or no toxicity to human health and the environment.
4. Chemical products should be designed to preserve efficacy of function while reducing toxicity.
5. The use of auxiliary substances (e.g. solvents, separation agents, etc.) should be made unnecessary whenever possible and, innocuous when used.
6. Energy requirements should be recognized for their environmental and economic impacts and should be minimized. Synthetic methods should be conducted at ambient temperature and pressure.
7. A raw material feedstock should be renewable rather than depleting whenever technically and economically practical.
8. Unnecessary derivatization (blocking group, protection and deprotection, temporary modification of physical and chemical processes) should be avoided whenever possible.
9. Catalytic reagents (as selective as possible) are superior to stoichiometric reagents.
10. Chemical products should be designed so that at the end of their function they do not persist in the environment and break down into innocuous degradation products.
11. Analytical methodologies need to be further developed to allow for real-time in-process monitoring and control prior to the formation of hazardous substances.
12. Substances and the form of a substance used in a chemical process should be chosen so as to minimize the potential for chemical accidents, including releases, explosions and fires. �

Anastas, Paul T., and Warner, John C. Green Chemistry Theory and Practice, Oxford University Press, New York, 1998.

Related Knowledge Center:

blog comments powered by Disqus
  • The Ongoing Quest to Coat the World in Green

    The Ongoing Quest to Coat the World in Green

    Jeff Alexander , VP of Sales, Coil and Extrusion Division, Valspar||October 19, 2015

  • Low- and Zero-VOC Technology

    Low- and Zero-VOC Technology

    Kerry Pianoforte, Editor||April 15, 2015
    Increasingly stringent environmental regulations have created a greater demand for low- and zero-VOC coatings products.  

  • Architectural Interior Coatings

    Architectural Interior Coatings

    Kerry Pianoforte, Editor ||January 19, 2015
    Growth in new construction and increased existing home sales drive growth for architectural interior coatings.

  • Self Cross-Linking Resin Coatings Offer Siding Manufacturers An Edge

    Self Cross-Linking Resin Coatings Offer Siding Manufacturers An Edge

    Bob Cregg, Industry Directory Building Products,Sherwin-Williams Product Finishes ||November 7, 2014
    New coatings that utilize a cross-linking resin meet the finishing challenges siding manufacturers face.

  • Benjamin Moore Hue Awards

    Benjamin Moore Hue Awards

    May 15, 2012
    At its annual celebration of color, Benjamin Moore’s HUEYs were presented for exceptional use of color in architecture and interior design.

  • PPG Launches Solar Glass Coating

    PPG Launches Solar Glass Coating

    Charles Thurston, Contributing Writer||May 15, 2012
    PPG's solar coating, Solarphire, is an anti-reflective coating for glass panels used in solar modules.

  • Architectural Coatings Market

    Architectural Coatings Market

    Tim Wright, Editor||January 24, 2012
    In high growth regions demand for architectural coatings continues to grow, but in the mature markets of North America and Western Europe difficult conditions remain.

  • White Roof Coatings Boost Solar Power

    White Roof Coatings Boost Solar Power

    Charles W. Thurston, Contributing Editor||September 14, 2011
    Most of the interest in white roofs comes from the heat reflection of the surface, which reduces energy consumption for cooling.

  • The Asia-Pacific Paint and Coatings Market

    The Asia-Pacific Paint and Coatings Market

    Scott Detiveaux, Allen Tsaur||August 15, 2011
    The Asia-Pacific region is an important and growing part of the global coatings marketplace. Unlike other regions of the world, the Asia-Pacific region has continued to grow, even in the face of the global recession.

  • Local Color

    Local Color

    Tim Wright||April 4, 2011
    Paint makers work with local designers, paint dealers to develop very specific color palettes for particular regions.

  • Toward a Clean Energy Future

    Toward a Clean Energy Future

    Tim Wright||March 10, 2011
    Coatings World caught up with former DuPont head Chad Holliday and discussed issues ranging from corporate environmental responsibility, sustainability, climate change and the American Energy Innovation Council.

  • Focus on China: Guangdong Carpoly

    Focus on China: Guangdong Carpoly

    Tim Wright||March 10, 2011
    Among the world’s top 40 paint producers, Guangdong Carpoly has ambitious growth plans for the future.

  • Benjamin Moore: Leaders in Exterior Deco Technology

    Benjamin Moore: Leaders in Exterior Deco Technology

    Tim Wright||October 5, 2010
    One of the leading North American paint manufacturers, Benjamin Moore continues to innovate new technology for the exterior architectural coatings market place. Jeff Spillane, senior product marketing manager at Benjamin Moore discusses some of these new advancements as well as the market in general.

  • "Green" Coatings Market is Growing

    "Green" Coatings Market is Growing

    Kerry Pianoforte, Associate Editor||March 29, 2010
    Manufacturers of low and zero VOC coatings are taking a holistic view when it comes to developing greener coatings, focusing not only on what goes into the can, but also on sustainable packaging and fuel efficiency.

  • Interior Color Trends

    Interior Color Trends

    Tim Wright, Editor||March 29, 2010
    More than ever paint companies must serve a diverse palette of color options.

  • The U.S. Interior Decorative Coatings Market

    The U.S. Interior Decorative Coatings Market

    Tim Wright, Editor||December 23, 2009
    Major U.S. paint manufacturers including Benjamin Moore, Kelly-Moore, Rodda Paint and Dunn-Edwards discuss key issues in the interior decorative coatings market.

  • Thermal Diffusion Coatings Protect Automotive Lock Parts

    Thermal Diffusion Coatings Protect Automotive Lock Parts

    Dan Riter||October 1, 2009
    The new Greenkote GmbH coatings plant in Germany delivers improved corrosion protection for automotive parts.

  • Marketing Matters

    Bonnie Morrow||October 1, 2009
    Because most coatings manufacturers have a broad, complex business model that embraces multiple customer targets, the selling and marketing of coatings requires a vigilant and precise understanding of customers and their needs.

  • Exterior Architectural Decorative Coatings

    Exterior Architectural Decorative Coatings

    Kerry Pianoforte||October 1, 2009
    In these tough economic times, DIYers and contractors look for exterior coatings that will offer money saving benefits.

  • iPhone Camera Meets Benjamin Moore Fan Deck

    iPhone Camera Meets Benjamin Moore Fan Deck

    Charles Thurston||August 4, 2009
    Benjamin Moore has wedded its color authority to the technology of iPhones. On June 1 the company debuted ben Color Capture, an iPhone application that, with the tap of a key, lets users snap a picture of any color and instantly match it to one of the more than 3,300 hues in Benjamin Moore's color system.

  • Encouraging Growth Potential for the Indian Paint Industry

    Encouraging Growth Potential for the Indian Paint Industry

    Devaraj Parthasarathy||August 4, 2009
    The Indian paint and coatings industry is still performing well despite slower growth due to the global financial crisis.

  • Low- & Zero VOC Paint Technology

    Kerry Pianoforte||May 7, 2009
    No longer merely a buzzword, demand for "green" coatings continues to increase for both the professional and DIY markets.

  • Wood Coatings Market

    Wood Coatings Market

    Kerry Pianoforte||February 2, 2009
    Tough economic conditions and a trend toward using composite materials in place of wood, mean another challenging year for wood coating manufacturers.

  • Interior Decorative Coatings

    Interior Decorative Coatings

    Tim Wright||January 8, 2009
    During tough economic times green products flood mature interior deco markets to try and keep sales buoyant.