Welcome Guest to Coatings World    Login || Register
Last Updated Thursday, December 25 2014
Print

Media and Milling Equipment Directory



A look at the latest offerings from select media and milling equipment manufacturers.



Published May 29, 2008
Related Searches: Color Production Equipment

Buhler Inc.


Plymouth, MN
(763) 847-9900

Fax:

(763) 847-9911

E-mail:

rene.eisenring@buhlergroup.com

Web site:

www.buhlergroup.com

Product name:

MicroMedia�Ultrafine Grinding to the Lower Nano-Range

Attributes/comments:

Buhler has launched the all new, pilot size, high-tech agitated bead mill, MicroMedia P1 last year and now follows up with the introduction of the larger production size MicroMedia mill P2 and P3. The specific technology of introducing grinding energy and the internal product flow are especially designed for a safe and reliable use of extremely fine beads from 300 �m down to 20 �m. Depending on the requirements of different material systems, the operating conditions can be varied from "soft milling" up to "high energy grinding," and combined with unusually high flow rates. Highest levels of quality standards can be achieved, corresponding with narrow particles size distributions in the lower nanometer range. An outstanding feature of the innovative mill concept is that the obtained results can be linearly scaled up to the production size mills of the MicroMedia series. Contact Buhler for more information and test the new mills with your products here in the U.S..

 

 

CB Mills


Gurnee, IL 
(847) 662-4000

Fax:

(847) 662-4003

E-mail:

sales@cbmills.com

Web site:

www.cbmills.com

Product name:

Dyno-Mill Research Lab

Attributes/comments:

CB Mills has introduced the Dyno-Mill Research Lab featuring: dispersing and grinding viscosity products to nano ranges; small product batch volumes; grinding products without metal contamination using ceramic wetted contact parts; the use of small grinding media size from 0.05-1.0 mm. The Dyno-Mill Research Lab achieves product quality, particle distribution, sub-micron particle size and viscosity range. CB Mills also offers modern process controls, which record all relevant process data and allows data acquisition and documentation on a PC.

CDC Microtron USA, Inc.


Grayslake, IL 
(847) 726-8005

Fax:

(847) 548-0099

E-mail:

sales@microtronusa.com

Product name:

Microtron Bead Mill

Attributes/comments:

The new patented Microtron bead mill has a unique double-helix bead band technology that produces uniform narrow particle size distribution resulting in micron or sub-micron dispersion, often in a single pass. The Microtron incorporates an innovative new concept� in dispersion mechanics by maximizing energy transfer into a low volume, concentrated bead mass. Optimum control of the manufacturing process by use of a computer controlled operator system. Testing equipment available.

 

 

Draiswerke, Inc.


Mahwah, NJ
(201) 847-0600

Fax:

(201) 847-0606

E-mail:

salesinfo@draiswerke-inc.com

Web:

www.draiswerke-inc.com

Product name:

DCP Nanostar

Attributes/comments:

The new Drais DCP Nanostar media mill is specifically designed to produce nanomaterials previously unattainable. The highly efficient energy utilization during nano-grinding via the use of ultra-small grinding media (down to 20 micron), superior product temperature control and the elimination of metal contamination are some of the key features of the new Nanostar. DCP Nanostar offers high energy density milling, internal true-media recirculation and the most efficient grinding media/product separation by centrifugal force. Drais DCP Nanostar sets new standards in wet grinding of high tech products down to nanometer range. Various sizes are available with linear mill scale up based on power consumption.

Eiger Machinery, Inc.


Grayslake, IL
(847) 548-0044

Fax:

(847) 548-0099

E-mail:

sales@eigerus.com

Web site:

www.eigerus.com


Product name:

Micro Media Mill

Attributes/comments:

The new laboratory Eiger Micro Media Mill has the ability to process samples as small as 50 ml which can aid in screening formulations and of dispersion samples requiring fineness of particles. This new arrangement can use grinding beads down to 0.1 mm diameter and provide high shear forces through a variable speed agitator and pumping system. Process parameters can be monitored including kilowatt hours.

 

 

Exakt Technologies, Inc.


Oklahoma City, OK
(405) 848-5800, (800) 866-7172

Fax:

(405) 848-7701

E-mail:

info@exaktusa.com

Web site:

www.exaktusa.com

Product name:

Exakt Three Roll Mills

Attributes/comments:

In this new age of nano ceramic/composite materials, new challenges in dispersion of nano particles is critical to product development. Exakt's electronically controlled three roll mills provide new levels of control, repeatability and information in the dispersion of a variety of types of powders, nano and not-so-nano into various new products.

Hockmeyer Equipment Corp.


Elizabeth City, NC
(252) 338-4705

Fax:

(252) 338-6540

E-mail:

mambrose@hockmeyer.com

Web site:

www.hockmeyer.com

Product name:

HCPD "S" Series Immersion Mill

Attributes/comments:

Hockmeyer Equipment Corp. introduces the high viscosity immersion mill. The new HCPS model is capable of milling viscosities as high as 400,000 cps. The HCPS mill is supplied with a sidewall scraper for thixotropic materials and the anchor helix scraper blade for heavier, tackier materials. The HCPS is also fitted with an auger extending out of the upper draft tube, enabling the mill to pull material from above the upper draft tube and feed it into the media field for grinding. �

Jaygo Inc.


Union, NJ
(908) 688-3600

Fax:

(908) 688-6060

E-mail:

sales@jaygoinc.com

Web site:

www.jaygoinc.com

Product name:

Dragonite Glass Beads

Attributes/comments:

Dragonite Solid Glass Beads, the world's highest quality glass beads, exceeds industry standards in all properties including, High Density, High Impact Strength, Abrasive Resistant, High Crushing Strength, No Broken or Fused Pieces, No Surface Cracks, Reduced Mill Wear. Lead Free beads that are suitable for wet milling, wet and dry grinding, polishing and plating. Wherever precision and perfection are required, Dragonite is there in a wide range of sizes (0-20 microns to 25 mm).

Lehmann Mills Inc.


Salem, OH
(330) 332-9951

Fax:

(330) 332-2208

E-mail:

info@lehmannmills.com

Web site:

www.lehmannmills.com

Product name:

3-Roll Mills

 

 

Myers Engineering, Inc.


Bell, CA
(323) 560-4723

Fax:

(323) 771-7789

E-mail:

cathy@myersmixer.com

Web site:

www.myersmixer.com

Product name:

Laboratory Basket Mill Model LB850

Attributes/comments:

The Myers LB 850 1 liter laboratory basket mill has been designed for use for small batch sizes and to assist in formulation and scale up. Users can expect improvement in particle distribution, yield and cost reductions. The LB850 has reduced production time and eliminates certain pre-milling stages. The specially designed cooling dome can frequently eliminate the need for jacketed tanks. Batch capacity is 2 to 4 gallons. Testing is available at the Myers facility in Bell, CA.

Norstone Inc.


Wyncote, PA
(215) 635-1366

Fax:

(215) 635-6355

E-mail:

sales@norstoneinc.com

Web site:

www.norstoneinc.com

Product name:

Turbo Polyblade

Attributes/comments:

The company has modified the Norstone Polyblade for a more aggressive dispersing action by molding/fabricating in "grinding pegs." The blade has three grinding pegs on each side. 

 

 

Premier Mill, an SPX Process Equipment Operation


Reading, PA
(610) 404-2821

Fax:

(262) 740-6393

E-mail:

julie.hoover@spx.com

Web site:

www.spx.com

Product name:

Premier Mill PSM Submersible Media Mill � Basket Type

Attributes/comments:

The PSM Submersible Mill is a batch type mill, in the general "basket mill" category�but with unique hybrid design which sets it apart from other single shaft "basket" type mills. The PSM mills incorporates a milling chamber with independently powered variable speed mixing shafts, which provides exceptional flexibility in production. Due to independent variable speed mixing shafts, the PSM can process a wide range of batch sizes and product viscosity. The PSM submersible mill is suitable for efficient production of small batches where rapid color changeover is required. The PSM is easy to clean, eliminating pumps, product plumbing and hoses, and contains no mechanical seals. Little routine maintenance is required with the PSM, which contains few moving parts. The hybrid design combines mixing and milling into one device, which makes the PSM a better fit in many applications than a traditional horizontal media mill. Lab size units available.

Sigmund Lindner GmbH


Warmensteinach, Germany
+49 9277-99429

Fax:

+49 9277-99499

E-mail:

sili@sigmundlindner.com

Web site:

www.sigmundlindner.com


Product name:

Silibeads

Attributes/comments:

Sigmund Lindner Type ZY and ZY-Premium yttrium stabilized zirconia beads are now available in tolerances below 100 �m. The perfect roundness and internal structural consistency are of the same high quality as the company's larger beads. The ZY beads with a high specific gravity (6.0kg/l), extremely long-life and smooth surface help increase milling efficiency without increasing mill wear. Type ZY yttrium stabilized zirconia beads fulfill the Directive 1935/2004/EC requirements in regards to processing food, pharmaceutical and cosmetic products.

Union Process


Akron, OH
(330) 929-3333

E-mail:

eli@unionprocess.com

Web site:

www.unionprocess.com

Product name:

DMQ-10

Attributes/comments:

The DMQ-10 combines the best features of a traditional horizontal small media mill with the added benefits of circulation grinding. The result is a versatile mill capable of providing a cost-effective, size reduction solution for grinding large quantities of material. Although the DMQ Series is able to operate in either circulation or continuous mode, using the mill for circulation grinding offers some unique benefits including a narrower particle size distribution, the ability to continuously monitor the slurry, and the ability to sample or add ingredients to the premix tank at any time. Also, temperature can be controlled more precisely since the slurry spends only a short period of time in the grinding chamber. The circulation grinding process involves the use of a large process/holding tank in addition to the DMQ Mill. The mill features a large, heavy-duty media separator located at the end of the mill for easy servicing. Indexed discs provide uniform media distribution.


blog comments powered by Disqus
Receive free Coatings World emails
Sign up now to receive the weekly newsletter, and more!

Enter your email address:
Company Spotlight
Siltech Corporation
225 Wicksteed Avenue
Toronto, ON, M4H 1G5
Canada
View Profile
Keeneyes
18F, No.85, Sec. 1, Chung-Shiao E. Rd.
Taipei, Taiwan, 100
R.O.C.
View Profile
Lubrizol Advanced Materials, Inc.
9911 Brecksville Road
Cleveland, OH, 44141
US
View Profile
AZ Electronic Materials Co., Ltd.
No. 458-6, Sinsing Road Hu Kou Township Hsinchu Country 303, Taiwan
Hsinchu Country, Taiwan, 303
Taiwan
View Profile
Sunin Machine Co., Ltd.
No.96, Chiao Ho Rd ,Chungho Dist
New Taipei City, Taiwan , 235
Taiwan Roc
View Profile
Micro Powders, Inc.
580 White Plains Rd.
Tarrytown, NY, 10591
US
View Profile
Shamrock Technologies, Inc.
Foot of Pacific Street
Newark, NJ, 07114
USA
View Profile
BASF Corporation
100 Campus Drive
Florham Park, NJ, 07932
US
View Profile
Houchi Chemical Co., Ltd
No.56, Fu Chow Street
Taipei, Taipei, 100
Taiwan
View Profile
Follow Coatings World On