12.05.18
Shamrock is showcasing a wide selection of specialty powders and dispersions for applications in industrial, architectural, plastic, can/coil, UV-curable and powder coatings. This global company provides additives for improving surface slip, mar and abrasion resistance, matting, texturing, and water repellency challenges, locally.
For water-based systems: Neptune 5223 N4 is an oxidized polyethylene wax. Neptune 5223 N4 is easily dispersible in water-based systems with minimal foam generation.
For powder coatings: PowderTEX 61 is an off-white free flowing polytetrafluoroethylene (PTFE) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling.
For UV-cure systems: S-394 MG is a fine particle size, polyethylene wax powder. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings. It has a high onset of melting, which leads to insolubility and, in inks, excellent imprintability and freedom from overprint varnish "crawling."
New products:
For water-based systems: Neptune 5223 N4 is an oxidized polyethylene wax. Neptune 5223 N4 is easily dispersible in water-based systems with minimal foam generation.
For powder coatings: PowderTEX 61 is an off-white free flowing polytetrafluoroethylene (PTFE) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling.
For UV-cure systems: S-394 MG is a fine particle size, polyethylene wax powder. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings. It has a high onset of melting, which leads to insolubility and, in inks, excellent imprintability and freedom from overprint varnish "crawling."
New products:
- XC-3185 is a cost-effective polyethylene wax designed for solvent-based use.
- PowderTEX 11 is an enhanced composition providing highly activated polytetrafluoroethylene (PTFE) with a particle size of one to three microns when dispersed or extruded.
