Mahwah, NJ, USA
The MacroMedia is a revolutionary new pre-grinding unit that combines high flow rate with bead processing. Operated in re-circulation, the system handles varying raw material quality with superiority, increasing the reliability of the milling process. Through a highly effective and efficient de-agglomeration, MarcoMedia allows process optimization of the fine-grinding step, cutting processing time and energy and increasing overall productivity.
Custom Milling & Consulting, Inc.
Fleetwood, PA, USA
Duplex Supermill Plus
The Duplex Supermill Plus media mill is designed with two horizontal chambers on one common frame. The product passes through the first chamber and directly into the second chamber without the need of a surge tank or separate feed pump. Typically, larger media is charged in the first chamber and finer media in the second chamber. This enables two stages of grinding in one continuous pass. CMC’s Duplex Supermill Plus can also be configured to work as two separate horizontal media mills.
EMImills – Engineered Mills, Inc.
Grayslake, IL, USA
EMImills Production Bead Mill
EMImills offers a new version of the its production bead mills that includes PLC computer controls to allow precise control of the milling process and data collection. Benefits include the duplication of batches and a better understanding the milling process. Available on all Pilot and Production Mills.
Glen Mills Inc.
Clifton, NJ, USA
High Density Rare Earth (CeO) stabilized Zirconium Oxide Grinding Media
Glen Mills Inc. introduces its most dense ceramic grinding media. The ZrO / Ceria (cerium oxide) stabilized has a specific gravity of 6.2. The high density and long wear rivals other beads, including the ZrO/yttria stabilized ones, all at a lower price point.
Size ranges are from 0.6-0.8mm to the largest 3.0mm diameter. These beads are attractively priced from $42.00 to $60.00 per kilogram depending upon size and order quantity. In stock for short delivery time. These are 82% ZrO2, 16% CeO2, and 2% other. Though standard package is 20 kg, Glen Mills Inc. offers smaller lot sizes for testing.
Hockmeyer Equipment Corporation
Elizabeth City, NC, USA
NexGen Inline Mill
The Hockmeyer NexGen Inline Mill is the cutting edge in recirculation milling equipment. It is a drop in plug and play replacement for traditional horizontal mills utilizing lower media loads. NexGen is the only inline recirculation mill that uses vacuum to pull material into the media field, grinding under vacuum and producing rapid particle reduction while deaerating the product.
Jyoti Ceramic Ind. Pvt. Ltd.
Airmont, NY, USA
Zirconox and Zircosil
Jyoti presents the ultimate ceramic micro mill beads with a high benchmark of performance and a hallmark of quality. Zirconox – wonder ceramic micro milling beads is a rare earth stabilized zirconium oxide composition with a high density of > 6.20 gms/cc. It is long lasting and can be used for milling of high-medium viscous formulations. Zircosil – the one-up zirconium silicate micro milling bead with upper medium density > 4.6gms/cc. Extremely cost effective and used for medium-low viscous formulations. Applicable for printing ink, auto and paint, minerals, gold, pharma, chocolate, cosmetics and many other industries.
Bell, CA, USA
850 Series Mill and Disperser
Myers Mixers’ M850 Series Dual-Shaft Basket Mill improves particle size and narrows particle size distribution. The submersible media mill uses the force of dense grinding media and product flow to achieve particle size reduction. The unique design of Myers’ M850 allows independent speed control of both media and batch agitators, offering greater flexibility and process control. This unique equipment design allows for one-tank processes, eliminating the need for pumps, hoses, and additional tanks. If foregoing milling entirely is preferred, the Myers 850 Series Dual-Shaft High-Speed Disperser with four overlapping blades offers superior dispersion in less time than standard single-shaft dispersers.
NETZSCH Premier Technologies, LLC.
Exton, PA, USA
NEOS Grinding System
NETZSCH has found a way to optimize the traditional peg grinding system to achieve the highest possible throughput rate, with the lowest amount of energy input, while respecting the highest level of quality during grinding and dispersing of various products. The Neos grinding system (see Fig. 5) reflects a series of improvements made possible through a redesigned grinding chamber, agitator shaft, and use of smaller grinding beads. A higher potential product throughput leads to an increase in the number of cycles per grinding period and thus to a narrower residence time distribution of the product particles in the grinding chamber.
Norstone, Inc. (Grinding Media Depot)
Bridgeport, PA, USA
The Grinding Media Depot offers a full range of grinding medias in all sizes, shapes, purity levels and materials for use in a wide variety of industries including industrial, chemical, food and pharmaceutical. Medias can range in densities: polystyrene, polycarbonate, polyamide, glass, quartz, alumina, silicon nitride, zirconia silica, zirconia silicate, magnesium/cerium/yttria zirconia oxide, silicon carbide, steel, tungsten carbide and lead.
Sunin Machine Co., Ltd.
Ceramic Horizontal Grinding Mill
Sunin’s sand mill and mixer have an excellence performance on coating, painting and cosmetics. We are focus on Traditional equipment adopts high-chromium steel as milling/grinding interface. We provide different material such as ceramic, SiC, YSZ and PU to meet different type of inorganic printing ink. We also dedicated ourselves in developing new grinding interface which can be applied on such as Lithium iron Phosphate, thermal isolation material, battery and insulation material (Metal fluoride) in technology field. Sunin also welcome customized product.