02.12.21
A.W.T. World Trade, Inc.
Chicago, IL USA
773-777-7100
sales@awtworldtrade.com
www.awt-gpi.com
Tornado Ink Mixer Ink Mixer & Color Blender
Attributes/comments: AWT’s Tornado Ink Mixer & Color Blender is ideal for mixing matched colors, adding pigments such as glitter or fluorescent color to bases, and for assuring proper blending of reducers and other modifiers. The unique design of the Tornado saves time by mixing right in the original container. Vertical adjustment prevents blade from scraping the bottom of the container. Adjustable self-centering locking clamps on the turntable accommodate both metal cans and plastic containers. Special blade configuration provides gentle but thorough mixing without splash-up or air bubbles. Blades simply slide on and off for easy changeover between container sizes. Up-front, solid-state control panel features a variable speed control and reversible turntable direction.
Press-Mate Ink Feeding System
Attributes/comments: AWT’s Press-Mate Ink Feeding System dispenses controlled amounts of conventional or U.V. inks and coatings to any press for uninterrupted production. Affix the feed tubes to your press or screen coater and the system will relay inks and coatings when and where you want them, in properly measured amounts. To change colors or emulsions, simply open up the chamber, take out the container of ink or emulsion, and replace it. Through flow is controlled either manually by the foot pedal, or automatically by the variable adjustable control valve system. Since the feed tubes are in air-tight chambers, the Press-Mate requires very little clean-up. Standard manual and automatic units come with a regulator valve with pressure gauge, three 10-foot long tubes for ink feeding, pressure chamber and cover, and air compressor. Depending on the model, the unit will handle most any size and shape container up to 5 gallons (19 liters).
Blade Depot (A divisionof Norstone, Inc.)
Bridgeport, PA USA
484-684-6986
Fax: 610-275-2404
sales@bladedepot.net
www.bladedepot.net
Polyblade HS Family of Polyblade with Teeth
Attributes/comments: High quality and consistent pre-grinds are critical to consistent and efficient milling. The Polyblade HS family is now available in a wide range of materials and designs. It has proven itself to be highly effective, efficient, long lasting and durable. It can be flipped over since it’s symmetrical and never gets sharp removing a safety hazard from the plant. HS blades are being used in a wide range of viscosities and densities including metal slurries and caulk. Sizes start at 1” up to 40”. Approved by large, small and super-sized coatings companies internationally. Free trials are offered in the U.S. up to 28”.
Buhler Inc.
Plymouth, MN USA
763-847-9900
buhler.minneapolis@buhlergroup.com
www.buhlergroup.com/
High-performance bead mill MicroMedia Invicta 3
Attributes/comments: Bühler’s MicroMedia Invicta has the same compact footprint as its predecessor and provides remarkable wet grinding benefits. The MicroMedia Invicta delivers the same high-quality output as the best available alternatives using 25% less energy. Also, the improved bead separation technology combined with a new design of the processing unit, translate into up to a 50% increase in productivity. The new bead separation system reduces blockages and pressure build-up and allow faster recirculation speeds, improving overall flow rates by an average of 100%. Imagine how that could transform your production output.
BYK-Gardner USA
Columbia, MD, USA
240-529-6659
andreas.stummer@altana.com
www.dispermat.com
TORUSMILL TM
Attributes/comments: TORUSMILL TM saves time with revolutionary 2-in-1 design. The intelligent and sturdy dispersing system combines a patented dissolver and integrated basket mill into one unit. In operation, the TORUSMILL is first used to predisperse the product with a dissolver disc. The torus shaped basket is “parked” in the upper part of the machine. After predispersion and with the push of a button, the milling basket containing the milling beads is lowered and the milling process for fine grinding starts. Predispersion and fine grinding in a closed system. This space saving system is a game changer in the world of dispersing and milling with 2 procedures done with one machine. Volumes up to 2,500 liters.
Charles Ross and Son Company
Hauppauge, NY USA
631-234-0500
Fax: 631-234-0691
mail@mixers.com
www.mixers.com
Ross PreMax Ultra-High Shear Mixer
Attributes/comments: The PreMax features a patented rotor/stator uniquely contoured to generate high flow and shear rates. Especially suited for pigment dispersions, the PreMax will often reduce the number of required passes through a media mill, if not eliminate milling entirely, depending on the formulation. The PreMax is available in a wide range of sizes up to 200 HP and normally provided with a hydraulic lift assembly for use with interchangeable mixing vessels.
Engineered Mills, Inc.
Grayslake, IL USA
847-548-0044
Dave.Peterson@EMImills.com
www.EMImills.com
Mixer/Disperser with Powder Induction
Attributes/comments: EMImills laboratory high speed mixers are available with a Rotor/Stator mixing head with powder induction system to allow efficient wetting of powders through sub level addition. The EMI Rotor/Stator head provides high shear forces while creating a vacuum that will draw material from the feed funnel and directly into the carrier fluid that is being pumped from the vessel bottom. Dusting from powder is reduced at the same time initial wetting occurs. The mixer is variable speed and available in different horsepower’s and mixer sizes. Contact EMImills regarding your process application.
Hockmeyer Equipment Corporation
Elizabeth City, NC USA
252-338-4705
sales@hockmeyer.com
www.hockmeyer.com
NEXGEN Vacuum Recirculation Mill
Attributes/Comments: The NEXGEN Vacuum Recirculation Mill is state of the art in particle size reduction.
Rapid-flow vacuum milling is designed to enhance efficiency and boost profits by reducing process times, increasing yields, and eliminating air entrapment. It facilitates faster, purer particle size reduction and deagglomeration without the hassle of air bubbles in the feedstock.
Jaygo, Incorporated
Randolph, NJ USA
908-688-3600
rosanne.deluca@jaygoinc.com
www.jaygoinc.com
Altern Mill
Attributes/comments: The Altern Mill is an ultra-fine wet grinding batch mill. Environmentally safe, clean, closed system offering reproducible high-quality dispersions. Combines the features of a high-speed disperser with that of a multimedia mill into one state-of-the-art unit. The unique grinding chamber reduces production time and decreases manufacturing costs. The right choice for milling operations looking to achieve less production loss, less contamination and less exposure.
Myers Mixers
Cudahy, CA USA
332-560-4723
sales@myersmixers.com
www.myersmixers.com
600/500 Series Horizontal Tank-Mounted Mixer
Attributes/Comments: Myers Mixers’ M850 Series Dual-Shaft Basket Mill improves particle size and narrows particle size distribution. The submersible media mill uses the force of dense grinding media and product flow to achieve particle size reduction. The unique design of Myers’ M850 allows independent speed control of both media and batch agitators, offering greater flexibility and process control. This unique equipment design allows for one-tank processes, eliminating the need for pumps, hoses, and additional tanks. If foregoing milling entirely is preferred, the Myers 850 Series Dual-Shaft High-Speed Disperser with four overlapping blades offers superior dispersion in less time than standard single-shaft dispersers.
Netzsch Premier Technologies, LLC
Exton, PA USA
484-879-2020
info.npt@netzsch.com
www.netzsch.com/gd
Grinding System Discus Intensive Rotor
Attributes/comments: The latest development in a long history in grinding technology. Based on decades of research and development, we developed the Discus Intensive Rotor, a wet grinding system that demonstrates impressive results in separation, flow, and grinding efficiency. This new technology is available in our customer test laboratory and available for product trials.
Sigma Equipment Corp.
White Plains, NY, USA
914-682-1820
info@SigmaUS.com
www.SigmaUS.com
ZIROX-A Zirconium Grinding Media
Attributes/comments: NEW ZIROX-A Zirconium Grinding Media is similar in composition and performance to our original ZIROX media but is lower priced thanks to a slight reformulation. The composition difference will not be suitable for all applications but in many instances users will see the same performance at a lower price. Samples are available.
STR Industries Inc.
800-439-1453
info@strindustries.com
www.strindustries.com
Grinding Media
Attributes/comments: Grinding media, used to refine material and reduce particle size, are available in a wide range of shapes, sizes and materials to meet wide range milling requirements. STR offers a wide variety of grinding media specifically engineered to meet the requirements we ensure quality manufacturing and reliable supply. Manufacturer of standard and custom steel, ceramic grinding media. Available in 0.8 mm to 80
Union Process Inc.
Akron, OH USA
330-929-3333
bli@unionprocess.com
www.unionprocess.com
Attritor and DMQX Horizontal Bead Mill
Attributes/comments: Original inventors of Attritor ball milling technology, Union Process manufactures a broad line of size reduction equipment including wet, dry, inert and/or cryogenic grinding attritors as well as the ultra-fine horizontal bead milling series (DMQX) in both lab and production scale sizes. We also offer a wide range of top quality tested and verified steel or metal-free grinding medias and OEM spare parts.
Chicago, IL USA
773-777-7100
sales@awtworldtrade.com
www.awt-gpi.com
Tornado Ink Mixer Ink Mixer & Color Blender
Attributes/comments: AWT’s Tornado Ink Mixer & Color Blender is ideal for mixing matched colors, adding pigments such as glitter or fluorescent color to bases, and for assuring proper blending of reducers and other modifiers. The unique design of the Tornado saves time by mixing right in the original container. Vertical adjustment prevents blade from scraping the bottom of the container. Adjustable self-centering locking clamps on the turntable accommodate both metal cans and plastic containers. Special blade configuration provides gentle but thorough mixing without splash-up or air bubbles. Blades simply slide on and off for easy changeover between container sizes. Up-front, solid-state control panel features a variable speed control and reversible turntable direction.
Press-Mate Ink Feeding System
Attributes/comments: AWT’s Press-Mate Ink Feeding System dispenses controlled amounts of conventional or U.V. inks and coatings to any press for uninterrupted production. Affix the feed tubes to your press or screen coater and the system will relay inks and coatings when and where you want them, in properly measured amounts. To change colors or emulsions, simply open up the chamber, take out the container of ink or emulsion, and replace it. Through flow is controlled either manually by the foot pedal, or automatically by the variable adjustable control valve system. Since the feed tubes are in air-tight chambers, the Press-Mate requires very little clean-up. Standard manual and automatic units come with a regulator valve with pressure gauge, three 10-foot long tubes for ink feeding, pressure chamber and cover, and air compressor. Depending on the model, the unit will handle most any size and shape container up to 5 gallons (19 liters).
Blade Depot (A divisionof Norstone, Inc.)
Bridgeport, PA USA
484-684-6986
Fax: 610-275-2404
sales@bladedepot.net
www.bladedepot.net
Polyblade HS Family of Polyblade with Teeth
Attributes/comments: High quality and consistent pre-grinds are critical to consistent and efficient milling. The Polyblade HS family is now available in a wide range of materials and designs. It has proven itself to be highly effective, efficient, long lasting and durable. It can be flipped over since it’s symmetrical and never gets sharp removing a safety hazard from the plant. HS blades are being used in a wide range of viscosities and densities including metal slurries and caulk. Sizes start at 1” up to 40”. Approved by large, small and super-sized coatings companies internationally. Free trials are offered in the U.S. up to 28”.
Buhler Inc.
Plymouth, MN USA
763-847-9900
buhler.minneapolis@buhlergroup.com
www.buhlergroup.com/
High-performance bead mill MicroMedia Invicta 3
Attributes/comments: Bühler’s MicroMedia Invicta has the same compact footprint as its predecessor and provides remarkable wet grinding benefits. The MicroMedia Invicta delivers the same high-quality output as the best available alternatives using 25% less energy. Also, the improved bead separation technology combined with a new design of the processing unit, translate into up to a 50% increase in productivity. The new bead separation system reduces blockages and pressure build-up and allow faster recirculation speeds, improving overall flow rates by an average of 100%. Imagine how that could transform your production output.
BYK-Gardner USA
Columbia, MD, USA
240-529-6659
andreas.stummer@altana.com
www.dispermat.com
TORUSMILL TM
Attributes/comments: TORUSMILL TM saves time with revolutionary 2-in-1 design. The intelligent and sturdy dispersing system combines a patented dissolver and integrated basket mill into one unit. In operation, the TORUSMILL is first used to predisperse the product with a dissolver disc. The torus shaped basket is “parked” in the upper part of the machine. After predispersion and with the push of a button, the milling basket containing the milling beads is lowered and the milling process for fine grinding starts. Predispersion and fine grinding in a closed system. This space saving system is a game changer in the world of dispersing and milling with 2 procedures done with one machine. Volumes up to 2,500 liters.
Charles Ross and Son Company
Hauppauge, NY USA
631-234-0500
Fax: 631-234-0691
mail@mixers.com
www.mixers.com
Ross PreMax Ultra-High Shear Mixer
Attributes/comments: The PreMax features a patented rotor/stator uniquely contoured to generate high flow and shear rates. Especially suited for pigment dispersions, the PreMax will often reduce the number of required passes through a media mill, if not eliminate milling entirely, depending on the formulation. The PreMax is available in a wide range of sizes up to 200 HP and normally provided with a hydraulic lift assembly for use with interchangeable mixing vessels.
Engineered Mills, Inc.
Grayslake, IL USA
847-548-0044
Dave.Peterson@EMImills.com
www.EMImills.com
Mixer/Disperser with Powder Induction
Attributes/comments: EMImills laboratory high speed mixers are available with a Rotor/Stator mixing head with powder induction system to allow efficient wetting of powders through sub level addition. The EMI Rotor/Stator head provides high shear forces while creating a vacuum that will draw material from the feed funnel and directly into the carrier fluid that is being pumped from the vessel bottom. Dusting from powder is reduced at the same time initial wetting occurs. The mixer is variable speed and available in different horsepower’s and mixer sizes. Contact EMImills regarding your process application.
Hockmeyer Equipment Corporation
Elizabeth City, NC USA
252-338-4705
sales@hockmeyer.com
www.hockmeyer.com
NEXGEN Vacuum Recirculation Mill
Attributes/Comments: The NEXGEN Vacuum Recirculation Mill is state of the art in particle size reduction.
Rapid-flow vacuum milling is designed to enhance efficiency and boost profits by reducing process times, increasing yields, and eliminating air entrapment. It facilitates faster, purer particle size reduction and deagglomeration without the hassle of air bubbles in the feedstock.
Jaygo, Incorporated
Randolph, NJ USA
908-688-3600
rosanne.deluca@jaygoinc.com
www.jaygoinc.com
Altern Mill
Attributes/comments: The Altern Mill is an ultra-fine wet grinding batch mill. Environmentally safe, clean, closed system offering reproducible high-quality dispersions. Combines the features of a high-speed disperser with that of a multimedia mill into one state-of-the-art unit. The unique grinding chamber reduces production time and decreases manufacturing costs. The right choice for milling operations looking to achieve less production loss, less contamination and less exposure.
Myers Mixers
Cudahy, CA USA
332-560-4723
sales@myersmixers.com
www.myersmixers.com
600/500 Series Horizontal Tank-Mounted Mixer
Attributes/Comments: Myers Mixers’ M850 Series Dual-Shaft Basket Mill improves particle size and narrows particle size distribution. The submersible media mill uses the force of dense grinding media and product flow to achieve particle size reduction. The unique design of Myers’ M850 allows independent speed control of both media and batch agitators, offering greater flexibility and process control. This unique equipment design allows for one-tank processes, eliminating the need for pumps, hoses, and additional tanks. If foregoing milling entirely is preferred, the Myers 850 Series Dual-Shaft High-Speed Disperser with four overlapping blades offers superior dispersion in less time than standard single-shaft dispersers.
Netzsch Premier Technologies, LLC
Exton, PA USA
484-879-2020
info.npt@netzsch.com
www.netzsch.com/gd
Grinding System Discus Intensive Rotor
Attributes/comments: The latest development in a long history in grinding technology. Based on decades of research and development, we developed the Discus Intensive Rotor, a wet grinding system that demonstrates impressive results in separation, flow, and grinding efficiency. This new technology is available in our customer test laboratory and available for product trials.
Sigma Equipment Corp.
White Plains, NY, USA
914-682-1820
info@SigmaUS.com
www.SigmaUS.com
ZIROX-A Zirconium Grinding Media
Attributes/comments: NEW ZIROX-A Zirconium Grinding Media is similar in composition and performance to our original ZIROX media but is lower priced thanks to a slight reformulation. The composition difference will not be suitable for all applications but in many instances users will see the same performance at a lower price. Samples are available.
STR Industries Inc.
800-439-1453
info@strindustries.com
www.strindustries.com
Grinding Media
Attributes/comments: Grinding media, used to refine material and reduce particle size, are available in a wide range of shapes, sizes and materials to meet wide range milling requirements. STR offers a wide variety of grinding media specifically engineered to meet the requirements we ensure quality manufacturing and reliable supply. Manufacturer of standard and custom steel, ceramic grinding media. Available in 0.8 mm to 80
Union Process Inc.
Akron, OH USA
330-929-3333
bli@unionprocess.com
www.unionprocess.com
Attritor and DMQX Horizontal Bead Mill
Attributes/comments: Original inventors of Attritor ball milling technology, Union Process manufactures a broad line of size reduction equipment including wet, dry, inert and/or cryogenic grinding attritors as well as the ultra-fine horizontal bead milling series (DMQX) in both lab and production scale sizes. We also offer a wide range of top quality tested and verified steel or metal-free grinding medias and OEM spare parts.
