05.29.08
Buhler Inc.
Plymouth, MN
(763) 847-9900
Fax:
(763) 847-9911E-mail:
rene.eisenring@buhlergroup.comWeb site:
www.buhlergroup.comProduct name:
MicroMedia�Ultrafine Grinding to the Lower Nano-RangeAttributes/comments:
Buhler has launched the all new, pilot size, high-tech agitated bead mill, MicroMedia P1 last year and now follows up with the introduction of the larger production size MicroMedia mill P2 and P3. The specific technology of introducing grinding energy and the internal product flow are especially designed for a safe and reliable use of extremely fine beads from 300 �m down to 20 �m. Depending on the requirements of different material systems, the operating conditions can be varied from "soft milling" up to "high energy grinding," and combined with unusually high flow rates. Highest levels of quality standards can be achieved, corresponding with narrow particles size distributions in the lower nanometer range. An outstanding feature of the innovative mill concept is that the obtained results can be linearly scaled up to the production size mills of the MicroMedia series. Contact Buhler for more information and test the new mills with your products here in the U.S..CB Mills
Gurnee, IL
(847) 662-4000
Fax:
(847) 662-4003E-mail:
sales@cbmills.comWeb site:
www.cbmills.comProduct name:
Dyno-Mill Research LabAttributes/comments:
CB Mills has introduced the Dyno-Mill Research Lab featuring: dispersing and grinding viscosity products to nano ranges; small product batch volumes; grinding products without metal contamination using ceramic wetted contact parts; the use of small grinding media size from 0.05-1.0 mm. The Dyno-Mill Research Lab achieves product quality, particle distribution, sub-micron particle size and viscosity range. CB Mills also offers modern process controls, which record all relevant process data and allows data acquisition and documentation on a PC.CDC Microtron USA, Inc.
Grayslake, IL
(847) 726-8005
Fax:
(847) 548-0099E-mail:
sales@microtronusa.comProduct name:
Microtron Bead MillAttributes/comments:
The new patented Microtron bead mill has a unique double-helix bead band technology that produces uniform narrow particle size distribution resulting in micron or sub-micron dispersion, often in a single pass. The Microtron incorporates an innovative new concept� in dispersion mechanics by maximizing energy transfer into a low volume, concentrated bead mass. Optimum control of the manufacturing process by use of a computer controlled operator system. Testing equipment available.Draiswerke, Inc.
Mahwah, NJ
(201) 847-0600
Fax:
(201) 847-0606E-mail:
salesinfo@draiswerke-inc.comWeb:
www.draiswerke-inc.comProduct name:
DCP NanostarAttributes/comments:
The new Drais DCP Nanostar media mill is specifically designed to produce nanomaterials previously unattainable. The highly efficient energy utilization during nano-grinding via the use of ultra-small grinding media (down to 20 micron), superior product temperature control and the elimination of metal contamination are some of the key features of the new Nanostar. DCP Nanostar offers high energy density milling, internal true-media recirculation and the most efficient grinding media/product separation by centrifugal force. Drais DCP Nanostar sets new standards in wet grinding of high tech products down to nanometer range. Various sizes are available with linear mill scale up based on power consumption.Eiger Machinery, Inc.
Grayslake, IL
(847) 548-0044
Fax:
(847) 548-0099E-mail:
sales@eigerus.comWeb site:
www.eigerus.com
Product name:
Micro Media MillAttributes/comments:
The new laboratory Eiger Micro Media Mill has the ability to process samples as small as 50 ml which can aid in screening formulations and of dispersion samples requiring fineness of particles. This new arrangement can use grinding beads down to 0.1 mm diameter and provide high shear forces through a variable speed agitator and pumping system. Process parameters can be monitored including kilowatt hours.Exakt Technologies, Inc.
Oklahoma City, OK
(405) 848-5800, (800) 866-7172
Fax:
(405) 848-7701E-mail:
info@exaktusa.comWeb site:
www.exaktusa.comProduct name:
Exakt Three Roll MillsAttributes/comments:
In this new age of nano ceramic/composite materials, new challenges in dispersion of nano particles is critical to product development. Exakt's electronically controlled three roll mills provide new levels of control, repeatability and information in the dispersion of a variety of types of powders, nano and not-so-nano into various new products.Hockmeyer Equipment Corp.
Elizabeth City, NC
(252) 338-4705
Fax:
(252) 338-6540E-mail:
mambrose@hockmeyer.comWeb site:
www.hockmeyer.comProduct name:
HCPD "S" Series Immersion MillAttributes/comments:
Hockmeyer Equipment Corp. introduces the high viscosity immersion mill. The new HCPS model is capable of milling viscosities as high as 400,000 cps. The HCPS mill is supplied with a sidewall scraper for thixotropic materials and the anchor helix scraper blade for heavier, tackier materials. The HCPS is also fitted with an auger extending out of the upper draft tube, enabling the mill to pull material from above the upper draft tube and feed it into the media field for grinding. �Jaygo Inc.
Union, NJ
(908) 688-3600
Fax:
(908) 688-6060E-mail:
sales@jaygoinc.comWeb site:
www.jaygoinc.comProduct name:
Dragonite Glass BeadsAttributes/comments:
Dragonite Solid Glass Beads, the world's highest quality glass beads, exceeds industry standards in all properties including, High Density, High Impact Strength, Abrasive Resistant, High Crushing Strength, No Broken or Fused Pieces, No Surface Cracks, Reduced Mill Wear. Lead Free beads that are suitable for wet milling, wet and dry grinding, polishing and plating. Wherever precision and perfection are required, Dragonite is there in a wide range of sizes (0-20 microns to 25 mm).Lehmann Mills Inc.
Salem, OH
(330) 332-9951
Fax:
(330) 332-2208E-mail:
info@lehmannmills.comWeb site:
www.lehmannmills.comProduct name:
3-Roll MillsMyers Engineering, Inc.
Bell, CA
(323) 560-4723
Fax:
(323) 771-7789E-mail:
cathy@myersmixer.comWeb site:
www.myersmixer.comProduct name:
Laboratory Basket Mill Model LB850Attributes/comments:
The Myers LB 850 1 liter laboratory basket mill has been designed for use for small batch sizes and to assist in formulation and scale up. Users can expect improvement in particle distribution, yield and cost reductions. The LB850 has reduced production time and eliminates certain pre-milling stages. The specially designed cooling dome can frequently eliminate the need for jacketed tanks. Batch capacity is 2 to 4 gallons. Testing is available at the Myers facility in Bell, CA.�
Norstone Inc.
Wyncote, PA
(215) 635-1366
Fax:
(215) 635-6355E-mail:
sales@norstoneinc.comWeb site:
www.norstoneinc.comProduct name:
Turbo PolybladeAttributes/comments:
The company has modified the Norstone Polyblade for a more aggressive dispersing action by molding/fabricating in "grinding pegs." The blade has three grinding pegs on each side.Premier Mill, an SPX Process Equipment Operation
Reading, PA
(610) 404-2821
Fax:
(262) 740-6393E-mail:
julie.hoover@spx.comWeb site:
www.spx.comProduct name:
Premier Mill PSM Submersible Media Mill � Basket TypeAttributes/comments:
The PSM Submersible Mill is a batch type mill, in the general "basket mill" category�but with unique hybrid design which sets it apart from other single shaft "basket" type mills. The PSM mills incorporates a milling chamber with independently powered variable speed mixing shafts, which provides exceptional flexibility in production. Due to independent variable speed mixing shafts, the PSM can process a wide range of batch sizes and product viscosity. The PSM submersible mill is suitable for efficient production of small batches where rapid color changeover is required. The PSM is easy to clean, eliminating pumps, product plumbing and hoses, and contains no mechanical seals. Little routine maintenance is required with the PSM, which contains few moving parts. The hybrid design combines mixing and milling into one device, which makes the PSM a better fit in many applications than a traditional horizontal media mill. Lab size units available.Sigmund Lindner GmbH
Warmensteinach, Germany
+49 9277-99429
Fax:
+49 9277-99499E-mail:
sili@sigmundlindner.comWeb site:
www.sigmundlindner.com
Product name:
SilibeadsAttributes/comments:
Sigmund Lindner Type ZY and ZY-Premium yttrium stabilized zirconia beads are now available in tolerances below 100 �m. The perfect roundness and internal structural consistency are of the same high quality as the company's larger beads. The ZY beads with a high specific gravity (6.0kg/l), extremely long-life and smooth surface help increase milling efficiency without increasing mill wear. Type ZY yttrium stabilized zirconia beads fulfill the Directive 1935/2004/EC requirements in regards to processing food, pharmaceutical and cosmetic products.Union Process
Akron, OH
(330) 929-3333