02.15.08
A.W.T. World Trade
Chicago, IL
(773) 777-7889
Fax:
(773) 777-0909E-mail:
sales@awt-gpi.comWeb site:
www.awt-gpi.comProduct name:
Tornado Ink Mixer and Color Blender 220 VAttributes/comments:
Heavy-duty 220 V model for extra-thick coating or applications requiring a high-torque rate. Features larger motor and greater drive capacity. Rather than mixing with spinning blades, the Tornado rotates the container while the specially designed blade blends the coating collected on the sides and bottom of the container ensuring complete mixing of the coating without splashing or creating air bubbles, regardless of its viscosity.Buhler Inc.
Plymouth, MN
(763) 847-9900
Fax:
(763) 847-9911E-mail:
rene.eisenring@buhlergroup.comWeb site:
www.buhlergroup.comProduct name:
Buhler ContiMixerAttributes/comments:
Buhler has developed a new ContiMixer that will allow continuous mixing for a variety of products and processes. This equipment is Buhler AG's answer to the coatings industry's quest to find a new method to mix large amounts of products safely in a closed process.Product name:
Buhler SEM Batch MixerAttributes/comments:
New from Buhler for 2008 are SEM mixers from 10 to 125 HP. All SEM mixers are powered by a new high frequency VFD drive that offers safe and quiet operation. The SEM mixers are available in high speeds, high torque and twin shaft configurations.CDC Microtron USA, Inc. �
Grayslake, IL
(847) 548-8224
Fax:
(847) 548-0099E-mail:
dave.peterson@cdcmicrotron.comWeb site:
www.cdcmicrotron.comProduct name:
CDC DisintegratorAttributes/comments:
CDC's disintegrator is a powerful premixing machine. Designed with multi micronizing elements which disintegrate large powder agglomerates resulting in extra fine particles. Mixing with the disintegrator causes massive upward and downward vortexing, ensuring maximum and thorough premixing of all wetted powders.Conn and Company LLC
Warren, PA
(814) 723-7980
Fax:
(814) 723-8502E-mail:
rcfreeman@connblade.comWeb site:
www.connblade.comProduct name:
Conn Blade of UHMW PolyethyleneAttributes/comments:
The patented Conn Blade of UHMW polyethylene is the most efficient and aggressive poly blade available. Provides great pumping action for material turn over as well as shear/dispersion. Lasts much longer than typical metal blades.�
Jaygo, Inc.
Union, NJ
(908) 688-3600, (888) 81-JAYGO
Fax:
(908) 688-6060Web site:
www.jaygoinc.comProduct name:
Titan Double Planetary MixerAttributes/comments:
The Titan double planetary mixer is able to provide intensive mixing, blending and homogenizing of liquid and pastey products under vacuum or inert atmospheres. Heating, cooling and change-can design enhance the equipment's capabilities. �
Product name:
Jaygo Vacuum Deaerator Attributes/comments:
The Jaygo vacuum deaerator is designed to continuously remove unwanted air from liquid and semi-viscous products, improving customers abilities to coat substrates evenly and void-free. Product consistency, clarity, coverage and application rate is greatly improved.Eiger Machinery, Inc. �
Grayslake, IL
(847) 548-0044
Fax:
(847) 548-0099E-mail:
sales@eigeruscomWeb site:
www.eigerus.comProduct name:
Eiger LHSD Lab Mixer/Rotor StatorAttributes/comments:
The Eiger LHSD rotor/stator mixer can mix, disperse, homogenize, emulsify and provide particle reduction on a wide variety of products requiring fine particles and uniform particle or droplet size. The sub-level mixing action avoids air entrapment by drawing liquid from the vessel bottom. Varying the rotational speed of the rotor will increase or decrease the mixing effect and energy transfer. Available with explosion proof electrical controls.Microfluidics
Newton, MA
(617) 969-5452
Fax:
(617) 965-1213E-mail:
mixinginfo@mfics.comWeb site:
www.microfluidicscorp.comProduct name:
M-110PAttributes/comments:
Microfluidics' portable M-110P Microfluidizer processor is a bench top lab machine requiring no compressed air or cooling water for hydraulics. Operating efficiency at up to 30,000 psi process pressure, the M-110P only needs a standard 20 amp, single phase "household" electrical outlet.Product name:
M-110EH-30Attributes/comments:
The M-110EH-30 enables the production of nano-suspensions and nano-emulsions, as well as liposomal encapsulation and cell disruption with the least number of passes. It is an excellent machine for small pilot runs.Myers Engineering, Inc.
Bell, CA
(323) 560-4723
Fax:
(323) 771-7789E-mail:
sales@myersmixer.comWeb site:
www.myersmixer.comProduct name:
Myers 850/Twin Shaft High Speed DisperserAttributes/comments:
Myers Engineering Model 850 twin shaft mixer improves product quality in less mixing time. The dual shaft, four-blade unit increases energy during the mixing cycle by using multiple disperser blades. Faster pigment loading can eliminate larger particle size milling. The unit decreases heat build-up, improves dispersion and generates less air entrapment. Processing times have been reduced by as much as 40%.Netzsch Fine Particle Technology, LLC
Exton, PA
(484) 879-2020
Fax:
(610) 280-1299E-mail:
info@npt.netzsch.comWeb site:
www.netzschusa.comProduct name:
ψ-Mix (PSI Mixer)Attributes/comments:
The Netzsch ψ-Mix achieves unmatched homogeneous pre-dispersion results when fine powders are rapidly wetted in a large liquid surface. Through the machine's high dispersion capability, higher pigment concentrations and more efficient processing are guaranteed.Product name:
PMD-VCAttributes/comments:
The patented Netzsch Mastermix PMD-VC (pre-mixer disperser) is a totally enclosed automated dispersion processing system for batch sizes ranging from 50-10,000 liters and larger, for low to high viscosity dispersion and for high shear dispersion/low speed agitation.Premier Mill, an SPX Process Equipment Operation
Reading, PA
(610) 779-9500
Fax:
(610) 779-9666E-mail:
premiermill@processequipment.spx.comWeb site:
www.spxpe.comProduct name:
Premier Mill PSM Submersible Basket Media MillAttributes/comments: The Premier PSM has more flexibility in batch size and viscosity range compared to other "basket type" mills. Perfect for production of small batches where rapid color changeover is required. The hybrid design combines mixing and milling into one device, which makes the PSM a better fit in many applications. Also, optional removable mixing shaft for increased flexibility.
Product name:
Premier Mill Max-Shear Inline DisperserAttributes/comments: Efficient, low maintenance, low cost disperser is compact enough to be used at any point in your process. Ideal for emulsifying and processing hard to wet materials. Its extremely high shear performance and powerful dispersing action generate the best premix possible, reducing work needed downstream.
