Coatings World Staff02.16.22
Blade Depot (A division of Norstone, Inc.)
Bridgeport, PA
484-684-6986
Fax: 610-275-2404
sales@bladedepot.net
www.bladedepot.net
Polyblade HS Family of Polyblade with Teeth
High quality and consistent pre-grinds are critical to consistent and efficient milling. The Polyblade HS family is now available in a wide range of materials and designs. It has proven itself to be highly effective, efficient, long lasting and durable. It can be flipped over since it’s symmetrical and never gets sharp removing a safety hazard from the plant. HS blades are being used in a wide range of viscosities and densities including metal slurries and caulk. Sizes start at 1” up to 40”. Approved by large, small and super-sized coatings companies internationally. Free trials are offered in the US up to 28”.
BYK-Gardner USA
Columbia, MD, USA
240-529-6659
info.byk.gardner.usa@altana.com
dispermat.com
Laboratory and pilot plant dissolver DISPERMAT® CN with high torque and versatility
Attributes/comments: The DISPERMAT® CN is an easy-to-use dissolver for laboratory and pilot plant operation. Due to the modular design the DISPERMAT® CN can convert to an APS Bead Mill, TML Basket Mill, CDS Vacuum Dispersion System, SR Rotor-Stator with the ASC Scraper System as an option for viscous materials.
Charles Ross and Son Company
Hauppauge, NY USA
631-234-0500
631-234-0691
mail@mixers.com
www.mixers.com
ROSS Inline Ultra High Shear Mixer 700 Series
ROSS Inline Ultra High Shear Mixer 700 Series is designed for challenging shear requirements, a more efficient alternative to colloid mills which generally suffer from low throughput. Depending on the application, it can replace high pressure homogenization; or serve as a pre-mixer to high-pressure homogenizers.
ROSS VersaMix Multi-Shaft Mixers with Solids/Liquid Injection Manifold (SLIM) Technology
ROSS VersaMix Multi-Shaft Mixers with Solids/Liquid Injection Manifold (SLIM) Technology enable fast and efficient large-scale powder dispersion into low-viscosity liquids including resins, oils, melted waxes, emulsions, and aqueous solutions. Featuring a High Shear Mixer with SLIM Technology, the rotor/stator assembly creates a powerful suction that draws solids sub-surface, directly into the high-shear zone.
Glen Mills Inc.
Clifton, NJ USA
973-777-0777
Sales@GlenMills.com
www.GlenMills.com
Model Alphie-1500 3-D Blender
Attributes/Comments: Alphie 3D mixers are ideal for homogeneous mixing of difficult powder systems: high and low density powders, small quantities into bulk filler, or larger particles sizes with smaller ones. The latest unit, the Model ALPHIE-1500, has the largest capacity to date. The Alphie 3-D motion follows a twisted Figure 8 path. This motion allows the powders to quickly homogenize with far less chance of unmixing as happens with Vee- or Double-Cone blenders.
Hockmeyer Equipment Corporation
Elizabeth City, NC USA
800-906-7278
sales@hockmeyer.com
www.hockmeyer.com
NEXGEN Vacuum Rotor Stator
Attributes/Comments: The NEXGEN™ Vacuum Rotor Stator creates de-aerated dispersions with narrow particle size distribution and volumetric accuracy. It develops optimal dispersion pre-mixes for milling into the nanoparticle size range. The vacuum forces agglomerates to break apart exposing maximum particle surface area for efficient wetting. The patented ‘H’ interlocking stator design creates a unique shear pattern of vertical and horizontal slots for ultra-dynamic impact while offering maximum open area for the greatest flow. This process takes place within a temperature-controlled environment to preserve formulae characteristics and function.
Jaygo, Incorporated
Randolph, NJ
908-688-3600
rosanne.deluca@jaygoinc.com
www.jaygoinc.com
Double Arm Mixers
Attributes/comments: Jaygo’s Double Arm Mixers are robust, heavy duty mixers for the production of high density/high viscosity products such as powdered tungsten, powdered tungsten carbide, pressed powdered metals, and thermal spray and hard-facing materials that require equipment that can intensively knead, mix, and disperse and dry powdered metals. The machines can be jacketed for heating or cooling, sealed for vacuum or inert processing, and operate via simple control or PLC/HMI.
Myers Mixers
Cudahy, CA USA
332-560-4723
sales@myersmixers.com
www.myersmixers.com
M850 Series Basket Mill
Attributes/Comments: Myers Mixers’ M850 Series
Dual-Shaft Basket Mill improves particle size and narrows particle size distribution. The unique design of Myers’ M850 allows independent speed control of both media and batch agitators, offering greater flexibility and process control – allowing for one-tank processes, eliminating the need for pumps, hoses, and additional tanks.
Netzsch Premier Technologies, LLC
Exton, PA USA
484-879-2020
www.netzsch.com/gd
Epsilon Inline Dispenser
Attributes/comments: With the Epsilon, NETZSCH introduces a totally new solution for producing homogeneous dispersions in an inline process with reproducible quality, even for shear-sensitive products. The dispersion process takes place in an atmospherically sealed chamber and is therefore dust and emission free.
Xtrutech Ltd
Philadelphia, PA USA
+44 (0)1782 621122
sales@xtrutech.com
www.xtrutech.com
Xtrutech M3 High Speed Mixer
The M3 is Xtrutech’s smallest laboratory mixer and features a 3 liter (100 fl oz) stainless steel mixing bowl. The M3 also includes a variable speed drive system, adjustable baffle blade, control panel with temperature, speed and current indication.
Xtrutech M5 High Speed Mixer
Xtrutech’s M5 is designed for bench-top operation and features a 5 liter (169 fl oz) stainless steel mixing bowl. The M5 also includes a variable speed drive system, adjustable baffle blade, control panel with temperature, speed and
current indication.
Bridgeport, PA
484-684-6986
Fax: 610-275-2404
sales@bladedepot.net
www.bladedepot.net
Polyblade HS Family of Polyblade with Teeth
High quality and consistent pre-grinds are critical to consistent and efficient milling. The Polyblade HS family is now available in a wide range of materials and designs. It has proven itself to be highly effective, efficient, long lasting and durable. It can be flipped over since it’s symmetrical and never gets sharp removing a safety hazard from the plant. HS blades are being used in a wide range of viscosities and densities including metal slurries and caulk. Sizes start at 1” up to 40”. Approved by large, small and super-sized coatings companies internationally. Free trials are offered in the US up to 28”.
BYK-Gardner USA
Columbia, MD, USA
240-529-6659
info.byk.gardner.usa@altana.com
dispermat.com
Laboratory and pilot plant dissolver DISPERMAT® CN with high torque and versatility
Attributes/comments: The DISPERMAT® CN is an easy-to-use dissolver for laboratory and pilot plant operation. Due to the modular design the DISPERMAT® CN can convert to an APS Bead Mill, TML Basket Mill, CDS Vacuum Dispersion System, SR Rotor-Stator with the ASC Scraper System as an option for viscous materials.
Charles Ross and Son Company
Hauppauge, NY USA
631-234-0500
631-234-0691
mail@mixers.com
www.mixers.com
ROSS Inline Ultra High Shear Mixer 700 Series
ROSS Inline Ultra High Shear Mixer 700 Series is designed for challenging shear requirements, a more efficient alternative to colloid mills which generally suffer from low throughput. Depending on the application, it can replace high pressure homogenization; or serve as a pre-mixer to high-pressure homogenizers.
ROSS VersaMix Multi-Shaft Mixers with Solids/Liquid Injection Manifold (SLIM) Technology
ROSS VersaMix Multi-Shaft Mixers with Solids/Liquid Injection Manifold (SLIM) Technology enable fast and efficient large-scale powder dispersion into low-viscosity liquids including resins, oils, melted waxes, emulsions, and aqueous solutions. Featuring a High Shear Mixer with SLIM Technology, the rotor/stator assembly creates a powerful suction that draws solids sub-surface, directly into the high-shear zone.
Glen Mills Inc.
Clifton, NJ USA
973-777-0777
Sales@GlenMills.com
www.GlenMills.com
Model Alphie-1500 3-D Blender
Attributes/Comments: Alphie 3D mixers are ideal for homogeneous mixing of difficult powder systems: high and low density powders, small quantities into bulk filler, or larger particles sizes with smaller ones. The latest unit, the Model ALPHIE-1500, has the largest capacity to date. The Alphie 3-D motion follows a twisted Figure 8 path. This motion allows the powders to quickly homogenize with far less chance of unmixing as happens with Vee- or Double-Cone blenders.
Hockmeyer Equipment Corporation
Elizabeth City, NC USA
800-906-7278
sales@hockmeyer.com
www.hockmeyer.com
NEXGEN Vacuum Rotor Stator
Attributes/Comments: The NEXGEN™ Vacuum Rotor Stator creates de-aerated dispersions with narrow particle size distribution and volumetric accuracy. It develops optimal dispersion pre-mixes for milling into the nanoparticle size range. The vacuum forces agglomerates to break apart exposing maximum particle surface area for efficient wetting. The patented ‘H’ interlocking stator design creates a unique shear pattern of vertical and horizontal slots for ultra-dynamic impact while offering maximum open area for the greatest flow. This process takes place within a temperature-controlled environment to preserve formulae characteristics and function.
Jaygo, Incorporated
Randolph, NJ
908-688-3600
rosanne.deluca@jaygoinc.com
www.jaygoinc.com
Double Arm Mixers
Attributes/comments: Jaygo’s Double Arm Mixers are robust, heavy duty mixers for the production of high density/high viscosity products such as powdered tungsten, powdered tungsten carbide, pressed powdered metals, and thermal spray and hard-facing materials that require equipment that can intensively knead, mix, and disperse and dry powdered metals. The machines can be jacketed for heating or cooling, sealed for vacuum or inert processing, and operate via simple control or PLC/HMI.
Myers Mixers
Cudahy, CA USA
332-560-4723
sales@myersmixers.com
www.myersmixers.com
M850 Series Basket Mill
Attributes/Comments: Myers Mixers’ M850 Series
Dual-Shaft Basket Mill improves particle size and narrows particle size distribution. The unique design of Myers’ M850 allows independent speed control of both media and batch agitators, offering greater flexibility and process control – allowing for one-tank processes, eliminating the need for pumps, hoses, and additional tanks.
Netzsch Premier Technologies, LLC
Exton, PA USA
484-879-2020
www.netzsch.com/gd
Epsilon Inline Dispenser
Attributes/comments: With the Epsilon, NETZSCH introduces a totally new solution for producing homogeneous dispersions in an inline process with reproducible quality, even for shear-sensitive products. The dispersion process takes place in an atmospherically sealed chamber and is therefore dust and emission free.
Xtrutech Ltd
Philadelphia, PA USA
+44 (0)1782 621122
sales@xtrutech.com
www.xtrutech.com
Xtrutech M3 High Speed Mixer
The M3 is Xtrutech’s smallest laboratory mixer and features a 3 liter (100 fl oz) stainless steel mixing bowl. The M3 also includes a variable speed drive system, adjustable baffle blade, control panel with temperature, speed and current indication.
Xtrutech M5 High Speed Mixer
Xtrutech’s M5 is designed for bench-top operation and features a 5 liter (169 fl oz) stainless steel mixing bowl. The M5 also includes a variable speed drive system, adjustable baffle blade, control panel with temperature, speed and
current indication.
