At Paint Istanbul, WACKER is premiering two newly developed VINNAPAS dispersible polymer powders for the construction sector that are particularly suitable as binders for tile adhesives, but can also be used in other dry-mix mortar products. Based on ethylene and vinyl acetate, VINNAPAS® 5005 N is aimed at cost-sensitive markets that call for a wide range of possible applications. The new product is a versatile all-rounder for numerous dry-mix mortars, from cementitious tile adhesives to plasters and self-leveling flooring compounds. It can even enhance gypsum applications such as gypsum plasters or joint fillers. The hard dispersible polymer powder offers particularly good tensile adhesion strength, even after heat storage, making it an ideal binder for tile adhesives (Class C1). At the same time, it has a long open time, which facilitates processing. The new VINNAPAS 5005 N also permits formulations with low polymer contents, making cost-efficient dry-mix mortars possible.
Novel VINNAPAS 8118 E, on the other hand, is a terpolymer based on vinyl chloride, ethylene and vinyl acetate. The semi-flexible powder was developed specifically to meet requirements both of flexibility and increased water resistance. Alongside a long open time and good processing properties, it offers excellent tensile adhesion strength after both heat storage and immersion in water. This makes VINNAPAS 8118 E ideal for modifying tile adhesives with different performance requirements (Classes C1, C2, S1 and S2).
The new silicone resin emulsion SILRES WH possesses hydrophobic properties that reliably protect outdoor wood against wet and damp and the damage that these cause. It is flexible enough to adhere strongly to wood surfaces and imbues them with the water-repellent properties typical of silicones. Weathering tests show that the product still protects impregnated wood against moisture and damp after more than 15 years. The 40-percent emulsion is based on a functional silicone resin and can serve as a water-repellent impregnating agent or as an additive for formulating film-forming wood stains. Due to its hydrophobic properties, SILRES WH reduces the water uptake of wood and keeps its water content low. Consequently, the wood is better protected against typical damage, such as cracks caused by swelling and shrinking. The water repellency is clearly revealed by the beading effect the emulsion produces on wood surfaces after weathering. By providing wood with long-term protection, the product greatly reduces the frequency of renovation compared with conventional wood preservatives.
The new dispersible polymer powder VINNAPAS 4121 N, based on vinyl acetate and ethylene, was specifically developed to meet requirements in Eastern Europe and Turkey. The semi-flexible product has a glass transition temperature of around 1°C and offers improved adhesion to various surfaces such as polystyrene. Mortars modified with VINNAPAS 4121 N thus adhere better to EPS panels or concrete, even under dry conditions. In addition, the new dispersible polymer powder permits lower polymer contents in the end product. This makes VINNAPAS 4121 N ideal for use in cost-efficient and energy-saving external thermal insulation composite systems.
For exterior applications such as finishing coats, VINNAPAS 5518 H is ideal. The dispersible polymer powder offers excellent processing properties and good adhesion to all substrates, coupled with high flexibility and flexural strength. In grout mortars, the enhanced cleaning properties must be highlighted, as they make the material easier to wipe after film formation. In the case of finishing coats modified with VINNAPAS 5518 H, moisture and dirt particles cannot penetrate the exterior wall due to the product’s highly water-repellent effect, resulting in enhanced weathering resistance and, thus, durability of buildings.