Hillsdale, MI, USA
ACT Scribe Table
Attributes: Inconsistent scribe depth is one of the leading causes of variation in salt spray and corrosion testing results. With the ACT Scribe Table, you can significantly improve scribe consistency across sets of test panels reducing variation in your
Middleboro, MA, USA
R/S SST Touch Screen Rheometer
Attributes: A soft solids tester that measures yield behavior in gels, pastes and liquid/semi-solid materials with suspended particles. The R/S-SST features the ability to operate in both controlled stress and controlled rate modes. Vane spindles are used to provide both viscosity and shear stress measurements.
DV2T Viscometer with Gel Timer
Attributes: The GEl Timer DV2T Viscometer features a unique magnetic compression- fit coupling to easily attach/detach the glass rod to/from the instrument. When gel time is reached, the display shows both gel time and equivalent viscosity value. The integrated temperature probe provides peak exotherm data in °C or °F if needed.
The Armor Group
Mason, OH, USA
Mixing equipment and vacuum dryers
Attributes: Processall’s line of horizontal plow mixing equipment is the industry leader in processing and mixing particles. Our drying cycles are faster than the industry average
because of careful considerations in heat transfer and higher U factor built into
Attributes: Each reactor is designed specifically for the process or application intended,
creating a very efficient reaction while still producing a high volume pounds per hour output of product. Materials of construction include all 300 series stainless steels as well as high nickel alloys.
Charles Ross & Son Company
Hauppauge, NY, USA
Laboratory Paddle Blender
Attributes: ROSS introduces a new Laboratory Paddle Blender offering advanced features for more convenient, automated powder blending and liquid spraying operation with recipe management. Shown is the 1-cu. ft. Paddle Blender (ROSS Model 42P-1SS) constructed entirely of US stainless steel type 304 with 150-grit interior finish and driven by a 1 HP TEFC motor. Complementing the blender’s full vacuum capability, new features including a pneumatic powder charging port and liquid delivery spray system promote batch-to-batch consistency. Touchscreen PLC recipe controls are housed inside a NEMA 4X stainless steel enclosure allowing for indoor or outdoor use. For increased versatility, an interchangeable ribbon agitator can be supplied with any new Ross Paddle Blender.
Both paddle and ribbon agitators are widely used in the preparation of dry solid-solid mixes, and can easily accommodate minor liquid additions.
Custom Milling & Consulting, Inc.
Fleetwood, PA, USA
Planetary Plus Mixer
Attributes: Each blade is designed with blades that are mounted to the shaft that are angled in different directions. As some of the blades are pushing material up from the bottom of the tank there are blades that are pushing materials toward the bottom. The high shear blade while simultaneously working with the finger blades shears particles and disperses them throughout
EIT Instrument Markets
Leesburg, VA, USA
UV PowerMAP II
Attributes: The PowerMAP II is 60% smaller than the PowerMAP with 30x more memory. The instrument features a user adjustable sample rate of 128-2048 samples per second and now available in high and low power ranges.
LEDCure Four Band Instrument
Attributes: EIT will release a four band (365, 385, 395, 405 nm) LEDCure radiometer in mid 2019 to support users with multiple types of LEDs. Each band features our patented “Total Measured Optic Response”.
Engineered Mills, Inc.
Grayslake, IL, USA
EMImils - Mini Mill – PLC
Attributes: EMI Mini Mills for testing dispersion samples by wet milling. Data collection available with PLC controls. Small volumes of pigments & additives milled by real process conditions. Color strength, gloss, transparency and stability can be studied.
Mississaugua, Ontario, Canada
OmniCure AC8-HD Series
Attributes: OmniCure AC8-HD Series LED UV curing systems offer outstandingly high optical power in three standard cure widths, 6” (150mm), 9” (225mm), and 12” (300mm), which can be adjoined to achieve countless curing sizes without compromise in uniformity. Available in multiple wavelengths (385nm, 395nm, and 405nm) the AC8-HD offers greater flexibility and ease
+44 (0) 1684 851551
Fax: +44 (0)1684 851552
FT4 Powder Rheometer
Attributes: FT4 Powder Rheometer, a universal powder tester, uses patented dynamic methodology, automated shear cells and bulk property tests, to quantify the flow properties of powders.
Fischer Technology, Inc.
Windsor, CT, USA
Attributes/comments: MMS Inspection DFT gauge nondestructively measures coating thicknesses. The intuitive user interface makes it easy to use (even for new users). Lightweight and durable, the compact instrument is ideal for onsite applications. Fischer’s patented conductivity compensation for measurements on non-magnetic base materials.
Attributes/comments: PHASCOPE PAINT is ideal for fast and easy thickness measurement of paint layers on ferrous and non-ferrous metals. Broad measuring range: up to 100 mils (2500 µm), it is well-suited for very thick coatings. Statistical evaluation of the readings using the Fischer app.
+49 40 514401-0
Fax: +49 40 514401-98
Mobile Surface Analyzer - MSA
Attributes: Measuring surface free energy in a second with only one click
Our innovative Mobile Surface Analyzer – MSA measures surface free energy with two liquids, fully automatically and mobile using our new “One-Click SFE” method. The MSA doses two parallel drops with one click, followed by the direct analysis of the contact angles and the derived results of the surface free energy. All steps are automated and happen within a second. The results enable well-founded statements about wettability by aqueous or organic liquids. The MSA supports you in your quality assurance in the pre-treatment and coating of solid materials in an ideal way.
Bubble Pressure Tensiometer - BPT Mobile
Attributes: Mobile quality control for cleaning and coating baths
Industrial quality assurance is about reliability, speed, and ease of use. When it comes to regular checks of the cleaner or wetting agent content in a bath, our Bubble Pressure Tensiometer – BPT Mobile is prepared for these demands.
M.E. Taylor Engineering, Inc./Semicro Division
Rockville, MD, USA
Adhesion Testing Analyzer
Attributes: Our newly patented instrument greatly improves the accuracy of cross hatch adhesion testing standards such as ASTM D3359 and ISO 2409. By automatically calculating the area removed and classification rating, user error is eliminated. No more comparing to blurry charts.
Bell, CA, USA
L850 Series - Lab-scale dual-shaft disperser
The Myers Mixers L850 Series laboratory-scale dual-shaft disperser is an ideal choice for rapid dispersion of lab and small-scale production batches. Two high-speed dispersion shafts can be co-rotating or counter-rotating, providing the shear or pumping your
LM850 Series - Lab-scale basket mill
Attributes: The Myers Mixers LM850 Series is a dual-shaft basket mill for fine dispersion and milling of particles. The cooling-jacketed basket chamber contains a pegged shaft and holds the milling media, while a second independently-driven shaft provides flow and residence time adjustment for the mill.
Paul N. Gardner
Pompano Beach, FL, USA
Attributes: Low voltage pinhole detector enabling you to inspect various coatings on conductive substrates for small defects such as holidays and pinholes. Ideal for use with a wide range or rolling spring electrodes. Custom sizes available upon request.
BYK Protective Coatings Field Kit
Attributes: Complete solution to evaluate the environmental conditions prior to painting with a film thickness gauge, BYK A200 termo-anemometer, BYK M200 moisture meter, BYK T200 IR Thermometer and carrying case.
+358 50 321 1955
Fax: +358 9 297 6116
PICOSUN P-1000 ALD Reactor
Attributes: The PICOSUN P-1000 Atomic Layer Deposition (ALD) reactor is designed for ultra-large scale batch coating of various 3D items such as mechanical machinery parts, glass or metal sheets, coins, watch parts and jewelry, lenses, optics, and medical devices and implants.
PICOSUN P-300B ALD reactor
Attributes: The PICOSUN P-300B Atomic Layer Deposition (ALD) reactor is designed for large-scale batch coating of various 3D items such as mechanical machinery parts, glass or metal sheets, coins, watch parts and jewelry, lenses, optics, and medical devices and implants.
RK Printcoat Instruments Ltd.
+44 (0) 1763 852187
VCML Lab Pilot Coater
Attributes: Designed to print, coat and laminate all types of flexible webs on a reel-to-reel basis, with the ability to apply various coatings by various application methods, the VCML particularly useful for product development, QC and small scale production for low volume of specialised products.
Sensory Analytics (Specmetrix Systems)
Greensboro, NC, USA
SpecMetrix DFT QA Coating Measurement System
Attributes: The SpecMetrix DFT QA Coating Measurement System delivers real-time, non-contact and non-destructive absolute coil coating thickness measurement data of primers and total top coat over any size samples. Designed to streamline coating QA processes, this highly accurate lab system improves coating process and quality control in virtually any QA lab or R&D center.
Union Process, Inc.
Akron, OH, USA
S1 Attritor with Touch Screen Controls
Attributes: Original inventors of attritor technology; Manufactures a broad line of size reduction equipment including wet/dry/inert/cryo grinding attritors as well as the DMQX-series ultra-fine grinding horizontal bead mill. Services include lab & pilot plant R&D, tolling, process optimization, and particle characterization.
Sigma Equipment Corp.
White Plains, NY, USA
RM-2.5 Lab Roll Mill