The emissions have been optimized by improving the cleaning and finishing processes of Lupranol® in such a way that the mechanical properties of the material remain unchanged during the following foam and processing steps. This means that the currently used Lupranol® grades can be exchanged immediately, there is no need for elaborate tests or renewed approvals of the PU systems which are based on these improved polyol grades. BASF markets the PU systems for flexible, semi-rigid and integral foams under the trademarks Elastoflex® W, Elastoflex® E and Elastofoam® I.
With the improved Lupranol® grades BASF contributes to automotive components with ever lower emissions. Completed parts made of BASF PU systems are tested internally as well as by certified test laboratories like Imat-Uve and Institut Fresenius. The improvement of the emission values varies from part to part: An average reduction of 20 percent is possible, measured according to commonly accepted chamber test methods like VDA276 and BMW GS 97014-3.
Governments around the world are continuously demanding lower emissions for vehicle interiors in order to reduce the possible impact of volatile substances on the health of car drivers, but also to lessen the typical new-car smell. The focus is currently on aldehydes such as formaldehyde, acetaldehyde and propionaldehyde, as well as aromatics from polyurethanes. BASF is working intensively on developing PU systems which allow for car components with lower emissions.