10.15.18
ExxonMobil Catalysts and Licensing LLC and BASF Corporation are conducting a full-scale commercial demonstration of a new gas treating solvent at Imperial Oil’s Sarnia Refinery. The companies jointly developed the new amine-based solvent aimed at meeting stringent sulfur emissions standards with greater efficiency, further raising the bar for tail gas treating and acid gas removal processes.
The technology improves the selective removal of hydrogen sulfide (H2S) and minimizes the co-absorption of carbon dioxide (CO2) from gas streams. The highly selective properties of the solvent allow refiners and gas processors to increase capacity and lower operating costs in existing equipment. For new treating facilities, the usage of the technology will reduce the size of the equipment and the initial capital investments.
When used in a tail gas treating unit in conjunction with a Claus sulfur recovery unit, the new technology has the capability to achieve greater than 99.99 percent overall sulfur recovery and very low emissions to cope with future requirements. Pilot plant testing has demonstrated superior performance characteristics over methyl diethanolamine (MDEA) formulations and even improvements over FLEXSORB SE/ SE Plus solvents.
“The new solvent technology will provide immediate benefits to ExxonMobil facilities and to our gas treating customers,” said Dan Moore, president of ExxonMobil Catalysts and Licensing LLC. “This commercial demonstration is to tangibly show the new level of performance.”
“Thoroughly tested at BASF’s dedicated pilot plant in Ludwigshafen, Germany, the solvent showed improved H2S selectivity and lower energy consumption than other selective solvents,” added Andreas Northemann, VP of BASF Gas Treatment.
The technology improves the selective removal of hydrogen sulfide (H2S) and minimizes the co-absorption of carbon dioxide (CO2) from gas streams. The highly selective properties of the solvent allow refiners and gas processors to increase capacity and lower operating costs in existing equipment. For new treating facilities, the usage of the technology will reduce the size of the equipment and the initial capital investments.
When used in a tail gas treating unit in conjunction with a Claus sulfur recovery unit, the new technology has the capability to achieve greater than 99.99 percent overall sulfur recovery and very low emissions to cope with future requirements. Pilot plant testing has demonstrated superior performance characteristics over methyl diethanolamine (MDEA) formulations and even improvements over FLEXSORB SE/ SE Plus solvents.
“The new solvent technology will provide immediate benefits to ExxonMobil facilities and to our gas treating customers,” said Dan Moore, president of ExxonMobil Catalysts and Licensing LLC. “This commercial demonstration is to tangibly show the new level of performance.”
“Thoroughly tested at BASF’s dedicated pilot plant in Ludwigshafen, Germany, the solvent showed improved H2S selectivity and lower energy consumption than other selective solvents,” added Andreas Northemann, VP of BASF Gas Treatment.
