04.30.19
Union Process, Inc. built a QL100 circulation Attritor for a large automotive accessories supplier.
"A number of things made this project a 'win-win,'" said Chuck Major, sales manager. "Not only did the Attritor need to be explosion-proof, but the customer had limited space. So, instead of purchasing several large batch Attritors, we recommended a large 1,000-gallon pre-mix holding tank as part of the system to increase their total production capacity with only one circulation 'Q' system Attritor. This same customer previously purchased a large S400 batch Attritor and this time needed a much larger capacity that we could accommodate with the QL100."
The Attritor features a grinding tank with a gross volume of approximately 111 gallons. The mill is powered by a 125 HP, 2-speed explosion-proof motor with a variable speed drive. An IEC starter and pushbuttons with a digital AMP display and emergency stop are mounted in a NEMA 7/9 enclosure and completely wired to the motor.
A large 1,000-gallon stainless-steel, pre-mix holding tank completes the recirculation system. The customer also ordered 4,000 lbs. of ¼" through-hardened carbon steel grinding balls.